Review on 🖥️ WALI Dual LCD Monitor Wall Mount with Gas Spring - Adjustable VESA up to 27 inch Screens, 14.3 lbs. Weight Capacity per Arm (GSWM002), Black by Lisa Adamczak

Bought a wall mounted version for the office. Easy to install, maybe an hour once you find the bolt. Routing the cables through the brackets was the hardest part (the screw on the cable cover won't tighten). Really well made item. The only caveat is that if you want your two monitors to touch side-by-side, since the arms aren't telescopic but swing in and out, move them closer or farther away from you, changing their angle and thus how close Monitors will be next to each other. In my case, two 27-inch monitors that curve slightly inwards stand about 12-14 inches from the wall. Move them closer to the wall and there will be a gap between them. Move them further away from the wall and they will start to overlap. You can change this a bit by rotating them inwards, but for the most part you're better off with the natural seat pitch (which will vary depending on the size of your monitors). The up and down movement is still easy to adjust, no matter how far or close they are from the wall. Also, find your stand before ordering. If your wall stand isn't centered on your desk, the monitors won't be centered on it either If so, this may not be for you. There's a little side-to-side wiggle room with the angle mounts, but moving side-to-side again changes their angle and the monitors' distance from the wall.