Review on Computer case Thermaltake Versa H18 black by Pahal Bhatta ᠌

The best case available for mATX and miniATX in the price range of up to 6000 dollars on the market. And assuming that the average price is 2,300, this fact alone makes the case an overwhelming favorite. despite some drawbacks. - Having a size that is not overly imposing - Both the design of the case and the quality of the materials used are exceptional * (for the price, it's just about ideal) - Capability to put in place LSS * (up to 3-slot version) Slots and cutouts are provided to facilitate organized cable routing. - Casing that is separate from the PSU zone * (rather thick material) - A satisfactory number of storage slots (2 * 3.5 + 2 * 2.5) - Vibration dampers for drives and bolts appropriate for both drive form factors are included * (bold plus) - There is a healthy flow of air coming from the front panel. The mesh is of very high quality. She is a double agent. the first and second metal, but the first has a larger perforation and the second has a smaller one, and while they appear to overlap, there is a slight offset, and there is a gap between them. Because of this, it is possible to freely pump air without allowing any dust particles, no matter how large or small, to enter the system. - A simple and quick cleanup. The front panel can be easily removed, does not require any special attachments to vacuum it, and provides access to either the air system or the coolant radiator. - The presence of a dust collector on the upper slot (on a magnetic tape) for a cooler, in addition to a dust collector for a power supply unit (PSU) * (on thresholds) - The complete functionality of the power control and reboot buttons has been brought forward. * (the buttons themselves are present). 2 * usb 2.0 + 1usb 3.0 + audio ports 3pin input/output * (for those who have minijack ears) Various disadvantages: -A significant amount of dust accumulating in the top cooler slot. It is possible to create a larger perforation in the material. Nothing should obstruct this slot, which is for air outlet, and blowing should keep dust from settling in it. Therefore, they went too far with the level of perforation they used. - The power supply unit (PSU) does not have any vibration dampers. In point of fact, there are landing contacts; however, they are made of metal. Even though I did not notice a difference when I installed a soft rubber gasket versus when I did not install it, it is still possible to glue it. - There is not enough room for the cooler on the top cover of the second slot. It is completely beyond my comprehension as to why they chose not to. There is a considerable amount of sternness. - I am interested in the same case, but I would prefer a variant that has a glass sidewall.