Review on 🚗 CURT 13143 Class 3 Trailer Hitch, 2-Inch Receiver, Compatible with Lexus RX350 and RX450h Models by Matt Wigfall

I have very little mechanical ability, I tried to install myself and successfully. Very strong, located above the silencer, you don't need to attach the silencer to this node like some other nodes. Looks like it belongs to a truck. A little note about the installation. 1) Take a picture of ALL THE BOLTS SO YOU CAN EASILY SEE IF YOU FORGET WHERE TO GO. 2) FOR SELF ASSEMBLY, I PLACED THE REFRIGERATOR UNDER THE DRIVER'S SIDE AND INSTALLED THE RADIATOR. THEN I RAISED THE MUFFLER ON THE PASSENGER SIDE AND ON THE DRIVER SIDE. (I STOLE THIS IDEA FROM ANOTHER REVIEW) AND IT WORKS IF INSTALLED BY YOU YOURSELF. 3) NO NEED TO REMOVE MUFFLER, I ATTACH IT TO TOP OF MUFFLER. IT WAS HERE, I HAD TO PUT THE SILENCER DOWN SLIGHTLY, BUT IT FITS. DISCONNECT COUPLING ON MUFFLER AND GO TO STEP 44) INSERT 2 BOLTS ON DRIVER SIDE, THEN GO TO PASSENGER SIDE AND INSERT ALL 3 BOLTS. DO NOT OVERTIGHTEN BOLTS UNTIL ALL 6 BOLTS ARE TIGHTENED. 5) YOU MUST NEED A TORQUE WRENCH. I TAKE MY NEIGHBORS. DO NOT INSTALL WITHOUT A TORQUE WRENCH. YOU WILL NEVER GET SCREWS UP TO 86 LB/IN WITHOUT A TORQUE WRENCH. 6) CUT AND INSTALL PLASTIC. IF I CAN DO IT, ANYONE CAN DO IT. Take your time and when you're done it will look original.