Review on ALITOVE WS2811 12mm IP68 Waterproof Digital RGB LED Pixel 💡 Light: 50pcs/Set, Individually Addressable Round LED Pixels Module, DC 5V, Diffused by Doris Tran

These LEDs are bright and bright. The build quality of these LED strings is perfect, the body of each LED is filled with some kind of waterproof coating, probably silicone, and the outer semi-soft shell provides rigidity. The wires that connect each LED together, the 20 AWG wire itself is safe up to about 11 amps, so it can carry quite a bit of current for your projects. Each end has an open circuit power input to reapply voltage once the strings are long enough to keep color consistent on really long runs. If I set the brightness of all three colors to 255, the soft white becomes brilliant and very close to the sunlight through the soft white cloud. tells me that the color fidelity of each LED (3) color is precisely controlled. They work great for me with: Adafruit NeoPixel, an RGB library; as the manufacturer says. 800kHz works for data output, so you get better color smoothness than if you just had a 400kHz NEO_RGB bitstream instead of the pre-programmed NEO_GRB in the Adafrut NeoPixel test library. I added: colorWipe(strip.Color(255, 255, 255), 50); // White RGB WARNING! MAKE SURE YOU HAVE AMPLIFIERS! This allowed me to test the RGB pixels turned on at full power to show their true colors. I was impressed that I was getting a soft, white, diffused light that didn't lean too much toward blue or any other spectrum.