Review on APDTY Overdrive 2000 2007 Transmission 7S4Z 7213 by Allan Duman

Ordered because the knob on the original was broken. Installed in about 40 minutes but I think I could do it in 30 if I had to do it all over again. As mentioned before, search and watch the video. The tools you need are simple: an Allen wrench, a Phillips head screwdriver, and something small and sharp to pry the knob on the plastic screw cover. I think my most tedious task was getting the button off without scratching it. The steps are not too difficult. Save all the screws - you will need them. Remove the armrest - 2 screws under the rear plastic cover (the cover comes off with your fingers) Set the emergency brake and put the car in neutral. Remove the console - 3 screws, one in the back under the knob and two in the front under the cup holders remove the set screw from the shift knob disconnect the O/D cable - it is visible from the passenger side remove the old shift knob and fit the new one using the screw reinsert the new input cable the console - 3 screws screw back the armrest - 2 screws plus the plastic cover screw the knob and cup holders back on the machine send liquid snacks to celebrate the money saved by making your own