Review on 💻 Black USB Male to PS/2 Female Adapter - C2G 27277 by Jermaine Krishnamoorthy

8-pin socket. Yes, the wires need to be soldered. It really helps to use an auxiliary device to solder the wire to the connector. Also tin the wire before inserting it into the holes. Use a small 15 to 25 watt soldering iron. When you first receive the connector, note that you remove the outer casing, then the first inner black plastic sleeve just gently slides out and then the inner shield pulls back. Before soldering wires, don't forget to put the outer sheath on the wire. Solder and assemble in reverse order. Check the connections with a volt/ohmmeter. +hands+ele%2Caps%2C150&sr=8-7