Review on 🔴 Dorman 84926 Ultra Bright Red 9/16-inch LED Indicator Light for Enhanced Visibility by Rocco Guale

I have a no frills lawn mower so I've added a few things that I think are important for safety and performance. Most machines have some sort of light that confirms the ignition is on, which is important for mowers and tractors. Since I didn't have one, I drilled a hole with a 1/2-bit bit and wiggled a bit to make room for the threads. Then I made a ground wire on one side and a short wire with a clip that I attached to the hour meter (yellow or yellow/white wire). There is enough red light to be seen on the street with sunglasses and big enough to be seen from a distance. This is a 12 volt LED. Minimal current, therefore very thin wires can be used for connection. connected with cables that had sockets. I use plastic coated connectors but the mechanical isolation is good enough you don't have to worry about short circuits. work with. It took me longer to find the right wire to connect than to drill a hole and install a light. The device requires about 2 inches of space for depth.