Review on 🔌 Efficient Dual USB QC 3.0 Power Socket Charger for Toyota: Fast Charge Smartphones, iPads, iPhones, Androids, and GPS by Antonio Lofton

I have Limited 2019 and TRD OR. I used two of these in each 4Runner to add a total of 4 USB ports. They are quite easy to install, it's very nice that they can be connected to the car without cutting the wires. I soldered them together so they are powered from a single 12V power connector (cigarette lighter socket). You simply disconnect the truck wiring at the very back of the truck power port and plug in the USB plug harness, then plug the UBS wire harness back into the power port (as a pass-through), perfect for zero cutting factory wiring or needing to pop something into the fuse box. I plugged my first 4Runner into the power connector in the storage compartment on the center console - it was a bit of a hassle because it was very tight and difficult to remove the factory plug and plug everything in with one hand. The second 4Runner that I plugged into the power connector under the stereo next to the factory USB port is a little harder than taking the 4Runner apart, but much easier to plug everything in. As you can see from the photos it looks very factory, the USB connectors fit the factory holes very well. The green LEDs are not too bright at night. In general I am very satisfied.