Review on 🚐 Premium 32 Inch Wiper Blade Pair for RV or Motorhome: Large 12mm J Hook, 2 Rubber Refills Included! by Raymond Doe

Luckily I tested them before installing. Both devices have the rubber blades incorrectly inserted into the metal arms. Explanation: The rubber blade has 2 slots molded along the full length of the blade on either side. The top notch (farthest from the "wiping edge" that touches the glass) is for the metal support wedges. You insert a spline on each side. The next slot is for gripping the metal hand holding the rubber blade. One end of the second slot will have a cast parting gap. Install a rubber spatula; You start by slipping the septum end through the handles on one end of the metal arm and continue to slide, going through the remaining handles one at a time until you reach the other end (remember, the metal wedges like to slip out). their respective slots if this). The last handle goes through the bulkhead and sits in a gap designed to catch the last handle and prevent the blade from slipping through the metal lever and falling off. It may take some effort to slide the handle past the baffle, but that's how it's designed. Then install the end cap/stop on the opposite end. This also serves as another means of preventing the rubber blade from slipping off the metal arm. They were received with both rubber slats, which happened to be mounted on metal levers, and (with pliers or other tool) one of the metal handles was squeezed and bent, effectively "clamping" the rubber slat in place - leaving the molded one Baffle in the slot was ignored. Luckily nothing was damaged beyond repair and I was able to fix the bent handles and put the rubber blades in place properly.