Review on 💎 Enhance Your Style with the Modern Black Ceramic Release Bracelet Deployment by Leah Griffin

Let me upfront by saying that with some instructions it would be a lot easier. Docked a star. The reason several reviewers said the pins slipped out was true. But they all attributed it to the enlargement of the holes. The truth is that there is a smaller hollow "anchor pin" that the larger pin slides through. If you pull out the big pin, gravity pulls out the smaller pin and it disappears forever. When removing the link, insert the smaller hollow pin into the middle link first, the larger link should go on either side of the middle smaller link (which now has an anchor pin). Then slide the larger pin back the way it came out. I found needle nose pliers helpful. It was also mentioned that there were no arrows showing the direction the pins should come out, try that too. On one side of the band, the pins were slightly recessed, while the other side was flatter. Insert the disassembly tool in the direction where the pins were slightly recessed, it's easier to install anyway. Let me reiterate that the pins that hold the links together had a two pin system, a hollow anchor pin and a longer pin that actually holds the links. binds together. If you don't know the smaller hollow anchor pin, it slips out and is lost forever. I'm sure that's why it gave the impression that other reviewers didn't conclude that removing the pin made the hole bigger and the pin just slid free. I hope this helps, I discovered this almost by accident myself. A manual would help here too.