Review on Motoforti 1 Pair Motorcycle Wide Foot Pegs 360 Degree Rotating Universal Aluminum Alloy Footpeg Footrest Pegs Pedal Green For Harley Davidson Dyna Sportster by Thunder Ballman

5 stars in my opinion for my black/chrome Dyna Fat Bob Love the look they provide slide off the spigot with a kick in the kidneys then ram through the hip joint so the super traction is 5+ stars my boots stay in place, don't ride over the round spigots they fold neatly too and unfold smoothly.The left grip bolts may hit the chrome rear derailleur if it is folded too far.Be careful when warming up the bike when it is folded,or the vibration may burn the surface of the rear derailleur.very It's easy, BUT BE CAREFUL WHO N YOU TAKE PARTS Each has two very small detent balls. a pin that prevents them from turning when tightened and they will fall out. I took them apart to apply threadlock to the included SHC screws. To adjust the angle on the bike, loosen them just enough to rotate. The downside is that the mounting hole was 9mm instead of 10mm as advertised. The screw for the 3/8" HD stylus didn't go through the eye of the stylus (my HD screws were T-45 Torx screws). I drilled the grommets for the pin to 3/8" diameter which is 9.53mm. The next downside is how easy it was to pierce them. It was a new drill with a TiN coating, but it went through the aluminum very easily. I suspect that it is a very low strength aluminum alloy. They *probably* fit light front pegs. But I might worry about a bike where I stand on the pegs to take the hard hits of the suspension. Finally, all the set screws are loosened by 1 or 2 turns, but tighten easily.