Review on 🌡️ EVGA mITX 92mm Sleeve ACX CPU Cooler 100-FS-C901-KR for Intel Socket 1150/1155/1156 - Direct Touch 4 Heat Pipe by Fred Meeks

Update: This thing has decided to leak under load. Prime95 for about ten minutes, then I see coolant splatter on the inside of my case window right next to this fan. I take it all apart and find that the inside of the fan is heavily spattered with oil/grease/antifreeze like clear goo. Double your tee shot. Like others, I had serious problems with the latches that attach the cooler to the board. The problem in my case was that 3 out of 4 pins were broken. When you push the pins down, two more pins need to catch in the grooves to keep the plunger from falling out. They couldn't get enough. Squeezing them together when the pin was fully seated allowed them to grasp. In my case this was not possible due to lack of space. So I removed all the push pins and shaved off the tips of the inner black clips holding the piston in place with x-acto. It worked. The cooler is great if you can install it. Eva, watch out. The problem won't go away until you find other clips.