Review on Kuryakyn 8851 Motorcycle Foot Control by Darren Boogie

Fits perfectly with all my Kury Iso pens and pens. Not ideal for 2003 Suzuki Intruder Volusia. But there is a workaround. What you can do is cut the rubber off the derailleur and then reassemble it with the bike tube. Cut inner tube, lay out and cut to width, rinse off talcum powder and dry. Coat one side with an industrial grade rubber adhesive like Pliobond. Wait for a slight stickiness. Be sure to clean the lever of adhesive residue and degrease it. Coat the metal switch with Pliiobond and wait for it to dry a bit. Wrap the rubber inner tube around the metal switch until it is wide enough for the Kury Peg lid to slide tightly over it. Wait a bit until everything has calmed down. Coat the inside of the Kury peg cover and the outside of the new rubber on the Pliobond switch to act as a lubricant and also help it stick together. that comes from turning. Tighten the hex head. I would recommend waiting a day for everything to heal before going for a walk. Hope that helps!