Review on 🔧 Inclusive UCEC Internal Mounting Bracket by Jack Herrera

The kit arrived exactly as described. The quality is what I expected. Metal bowls are ideal. No surprises. I installed my Samsung EVO SSDs using the bottom mounting screws - they line up perfectly. The screws fit perfectly. I didn't have the screwdriver issues others have described; head size was perfect; Users are right that the head is not magnetic. Note that you can also use a standard Philips screwdriver, which works just as well. So if you have one with a magnetic head, it's easier to deal with. The bays have a cutout on the back so you can seamlessly connect straight SATA cables or 90 degree SATA cables to the back of the SSD. I didn't use the included SATA cables as I already had good quality 6G cables with 90 degree heads. The supplied cables have a straight head. I have an older mid-tower ATX case, so I haven't had the mounting issues that others have described with their quick release cases etc. The included screws attached the trays to my case perfectly. The only thing I could say that could be improved is that the bolts could be used with a small washer head. The screws are very small. The screws don't go through the slots in my case, but very close. I could see a possible problem here. Luckily, simply going to your local hardware store and buying a few small pucks would do the trick. I would pay $10 for just trays and screws but you get so much more! Serial SATA cables (x2), SATA power cables (I run to a 2-wire extension cable), and Molex to SATA power cable adapters (1-wire to 2-wire). What's not to like?! This is excellent value for money! Would buy again anytime if needed.