Review on 💪 Enhance Efficiency with the Jones Stephens Corp J44-150 1-1/2" Ram Bit Socket Saver by Brandon Micali

I had to remove the tee so I could change the sink from a double to a single sink. Due to the way it was installed I didn't have enough room to cut it past the tee so I cut the tee where it was glued to the drain and used this little jig, to hollow it out and install the new piece. . The plumber wanted $350. Right. It's not the easiest thing to use because if you're not careful you can come off the corner and ruin the piece. I walked slowly. Wait a few seconds, pause, clear it, see how things are, make sure I'm still centered, and repeat. It doesn't fit like a glove like a store bought piece and there will be a little play in the finished result, just take your time and work hard with the purple material and you'll be fine. When you are finished making the final adjustment, hold the part for 30 seconds to allow the glue to set. I just took off a star as it looks like it's asking for a better design, something that would encourage you to stay centered.