Review on 💧 Sabrent EC-WPTF USB 3.2 IP67 Water Resistant Tool-Free Enclosure for M.2 PCIe NVMe and M.2 SATA SSDs with Enhanced SEO by Lee Rodriguez

Я использовал корпус NVMe с диском на 500 ГБ внутри в качестве внешнего хранилища для моей старой PS4, но этот корпус менее дорогой продукт, что That. This Sabrent case is beautiful and the technique used in this case is really beautiful. The tool-less design makes installing and replacing M.2 drives a breeze. It's very annoying to have to pry out a tiny screwdriver just to swap out the internal drive. This case has a small ring that you turn to open or close the disc. There is also a small piece of rubber that holds the drive in place, usually with a screw. I wish they had at least one spare because I can see this thing easily falling to the floor and rolling under some furniture or into an air conditioner vent. drive and in the aluminum housing. The rubber ring inside is very similar to the waterproof measures used in IP67/68 smartphones. This product is IP67 rated, which means it can be fully submerged under water to a depth of 3 feet for 30 minutes and still be fine. 6 is the dust class, 7 is the water class. However, this does not mean that it is intended for intentional underwater use, it simply means that it is protected against accidental submersion or splashing. This applies to freshwater but not to seawater. This case is very durable and well built so I wouldn't have any issues if I dropped it in water or on a hard surface. With external SSDs being expensive and secure ones even more so, this product has amazing value when paired with an M.2 drive. It works with PCIe NVMe M.2 drives (2242, 2260 and 2280). Specifically, it supports M key sockets and B+M key sockets, which are NVMe-based drives. It does NOT support B-Key (M.2 based on SATA) or M-Key (M.2 based on PCIe AHCI). If this sounds like alphabet soup to you, I recommend you look up the documentation that came with your M.2 drive to find out what type you need, to avoid buying this product and risking it inconsistent with your SSD -Battery works. It uses USB 3.2 for a maximum transfer rate of 10 Gbps (but the speed you get really depends on your drive and the computer it's connected to. The only faster enclosures are USB 3.2 Gen 2x2 (20 Gb/s ) Housing). c) and Thunderbolt 3 (40Gbps) (I don't think there are any USB 4 enclosures left on the market. Most computers have 5 or 10 gigabits per second on their USB-C ports unless the computer supports it Thunderbolt 3 ports This drive should be fast enough for all non-Thunderbolt capable devices Having used several brands of cases this case from Sabrent is by far the BEST I've used It's really solid premium and one of the most durable cases you can buy.