Review on 🔌 Reliable Projection: Certified Lightning Charging Compatible Projectors by Will Schimmel

I could never get this to work. I've tried many combinations, several different NVME drives, and not once have I been able to get it to work. The enclosure is displayed and the drive is correctly identified. As soon as the operating system tries to read from the hard disk, the read operation fails. Sorry, I wanted this case to be great. -1: New USB device found, idVendor=1de1, idProduct=1101, bcdDevice=21.00kernel: [376125.684016] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3kernel: [376125.684018 ] usb 1-1: product: AM8180kernel: [376125.684021] usb 1-1: manufacturer: AMicrokernel: [376125.684023] usb 1-1: serial number: 012345687981kernel: [376125.745827] usb-storage 1-1:1.0: storage device detected USBkernel: [ 376125.746301] scsi host5: usb-storage 1-1:1.0kernel: [376126.756797] scsi 5:0:0:0: AMicro AM8180 NVME 1.00 direct access: 0 ANSI: 6kernel: [376126.757425] sd 5:0 : 0: 0 : Connected SCSI Generic SG2 Type 0Kernel: [376126.792260] SD 5:0:0:0: [SDD] 500118192 512 bytes Logical Blocks: (256GB/238GB)Kernel: [376126.794145] SD 5:0 : 0:0: [ sdd ] Write protection disabled by kernel: [376126.794149 ] sd 5:0:0:0: [sdd] Mode Sense: 37 00 00 08kernel: [376126.795936] sd 5:0:0:0: [sdd] Write cache: disabled , Read cache: enabled, does not support DPO or FUAkernel: [376126.85 6435] print_r eq_error: 2601 Callbacks Kernel suppressed: [376126.856438] blk_update_request: I/O error, dev sdd, sector 0 op 0x0: (READ) flags 0x0 phys_seg 1 prio class 0kernel: [376126.856445] Buffer I/O error on dev sdd , more logical Block 0, asynchronous read kernel page: [376126.856506] blk_update_request: I/O error, developer SDD, sector 0 op 0x0: (READ) flags 0x0 phys_seg 1 prio class 0kernel: [376126.856511] Buffer I/O error on developer SDD, logical block 0, asynchronous side read kernel: [376126.856591] blk_update_request: I/O error, developer SDD, sector 0 op 0x0: (READ) flags 0x0 phys_seg 1 prio class 0kernel: [376126.856596] buffer E /A error on developer SDD, boolean block 0, readkernel asynchronous page: [376126.856647] ldm_validate_partition_table(): Error reading disk.kernel: [376126.856673] blk_update_request: I/O error, dev sdd, sector 0 op 0x0: (READ) flag s 0x0 phys_seg 1 prio class 0kernel: [ 376126,856677] Buffer I/O error pa on dev sdd, logical block 0, read kernel asynchronous page: [376126.856756] blk_update_request: I/O error, dev sdd, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0kernel: [376126.856761] Buffer I/O error on dev sdd, logical block 0, asynchronous Read page Kernel: [376126.856844] blk_update_request: I/O error, dev sdd, sector 0 op 0x0: (READ) flags 0x0 phys_seg 1 Prio class 0kernel: [376126.856849] Buffer I/O error on dev sdd, logical block 0, readkernel asynchronous page: [376126.856925] blk_update_request: I/O error, dev sdd, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 priority class 0kernel: [376126.856930] Buffer I/O error on dev sdd, logical block 0 , asynchronous page read, Kernel: [376126.856992] Dev sdd: Block RDB 0 cannot be read, Kernel: [376126.857019] , Sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 Prio class 0kernel: [376126.857023] Error I /O Buffer on dev sdd, logical block 0, read async page Kernel: [376126.857086] blk_update_request: I/O error, developer SDD, sector 0 op 0x0: (READ) flags 0x0 phys_seg 1 prio class 0kernel: [376126.857091] buffer I/O error on developer SDD, logical block 0, asynchronous page read Kernel: [376126.857178] blk_update_request: I/O error, developer SDD , sector 24 op 0x0: (READ) flags 0x0 phys_seg 1 prio class 0kernel: [376126.857183] buffer I/O error on developer SDD, logical block 3, read asynchronous page kernel: [376126.857348] sdd: tablekernel partition can cannot be read: [376126.892239] sd 5:0:0:0: [sdd] Attached SCSI hard disk