Review on 📱 JPUNG Screen Replacement for iPad 6 6th Gen Digitizer 2018 9.7'', A1893 A1954 Touchscreen, Full Repair Kit + Video Tips by Jose Guevara

Installation is very easy. The hardest part is tearing off the old glass. It took over half an hour and I had to completely smash the old glass to get it off. I bought this one with the home button just to be on the safe side. After I was done, I realized I should buy the one without. No wonder most people sell them without a home button. I reused the old one to store my credentials. It is very easy to detach and attach a new one. In general, you can follow the instructions on the packaging. A tricky part is the longest flat wire that runs from the glass to the pad. It is attached with thin tape. All other connectors are clip-on, so you can open them with the paste provided, but you'll have to peel the tape and pull out. Levering will bend the connectors. After you're done, it's a good idea to check that it works before you tape the glass back to make it permanent. The LCD display may not light up. Don't panic, the tablet needs to be restarted. Press and hold the power button and home button for 10 seconds and it will restart to illuminate the LCD. Avoid my mistakes listed above and good luck, you can be done in an hour.