Review on CPU cooler ID-COOLING IS-40X, black/white by Wiktor Krzysztof Kor ᠌

IMHO for the money it's top! I bought it for 900 and it's stupid to expect a backplate for that price. If your hands are crooked and you are afraid to overdraw, then please pay more for the cooler. for am4 socket: The backplate problem is solved in half an hour with a minimum tool: a screwdriver, a 4 mm drill, a hacksaw, a needle file. We take a native backplate from the mother (or as I order on Ali for 150 r), drill the fasteners in it, cut them down to 1 mm, buy screws and nuts m3 x 15 mm in the hardware store and screw these screws into the cooler fasteners from the back of the mother . Profit for 50! someone here wrote that he screwed it to his native backplate - this is rut. Firstly, this cooler has m3 screws, while the native backplate has m3.5 screws. They do not twist tested. Secondly, on the backplate, you need to grind or cut down the mounts that stick out above the motherboard, otherwise there will be a gap between the cooler and the processor, since the mount cooler also has such mounts. And in terms of noise, again, for such a price, I did not find a cooler (top-flow) quieter. Under load, against the background of my RX570, it is not even close to audible, and during office work it reduces the speed to 900, where it is also completely inaudible