Review on 🔥 ATOMSTACK A5 Pro 40W Laser Engraver Master: Efficient DIY Wood & Metal Engraving Machine with Eye Protection by Kelsey Brown

At first I had low expectations for this product, but after 20 minutes of assembly I was pleasantly surprised by its performance and accuracy. I am using the GRBL laser as the control program. Seems to work well and accepts a decent range of file types to import. Good and solid extruded anodized aluminum rails with a precise fit. A few things to note: The X-axis holder at the top is supported by a tapered roller and rail that centers and supports the laser head. Two above and one below. After a few hours of work I had to tighten the fit between the two upper and lower rollers, to keep the laser head fixed when the Y-axis direction changes rapidly To focus the head, two Allen screws need to be loosened and shifted 2mm. Thick pad on the work surface. Not the fastest or smoothest for various materials. Be prepared to do many test engravings and cuttings on different types of materials. Small variations lead to significant changes in the results. I made lots of notes on power and speed combinations for the most common materials I have engraved and cut. Be prepared to do many test engravings and cuttings on different types of materials. Small variations lead to significant changes in the results. I made lots of notes on power and speed combinations for the most common materials I have engraved and cut. Be prepared to do many test engravings and cuttings on different types of materials. Small variations lead to significant changes in the results. I made lots of notes on power and speed combinations for the most common materials I have engraved and cut.