Review on 🚦 Waterproof High Mount Stop Light with Gasket - Smoked LED 3rd Brake Light for 92-97 Ford F150, F250, F350, Bronco - Compatible & Reliable Cargo Lamp by William Bell

Yes the price is attractive but here are a few things to consider before you pull the trigger: Any F150 with this 3rd brake light harness, this one Product does not connect and works. The plugs supplied must be cut off as they will not work. 2) It comes with no instructions - no documentation on which wires go to what. If you have alligator clips, you can check which wires light up with white LEDs and which turn red, label them, and install them yourself. In the 2013 F150, the car's green wire activates the white reverse light and the red wire activates the brake light. The middle wire on this item goes to the red LEDs, the side wires activate the white.3) The bolts/nuts provided do not fit - they are too short. Use your existing screws - they are silver and look better than the non-gold screws provided. 4) The wires supplied are very, very short. It is recommended to have simple connectors on hand (e.g.: uxcell A14031900ux0663 Gel Splice). Connect all 3 black wires to 1 connector and a separate connector for red and white LEDs, so have at least 3 gel connectors on hand for splicing. just installed and will update this review if the light fails over time.