Review on ZEROXCLUB Wireless Interference Waterproof SW01 by Joseph Adaymiln

I received my order for Zeroxclub Wireless Camera (SW01) with 7 inch monitor. I tested the camera and monitor to make sure they are paired before proceeding to install the camera, they tested fine. As seen in the picture, the camera was mounted on the back of my 33ft fifth wheel. The camera was powered by the trailer running lights. Starting off, the center marker light was removed to allow access to the wires behind the 2-inch opening behind the light. A 1/2 inch hole was then drilled in the trailer bed to allow the wires from the camera to pass through. I pull the camera wires out of the larger 2" hole. The camera wires were then connected to the trailer's electrical system and tested for functionality. After testing was complete, the lantern was reinstalled and silicone sealant applied if necessary. I mark the position of the camera mount and use it a self tapping screw to mount the camera, be careful when looking for a place to drill wires so they can go through the check and double check, the camera and monitor work fine, the picture is clear I didn't hit the road to see how the system works on the Autobahn.So far I like how it works.One last note, after receiving my order I noticed that the price in the system had gone down I contacted Zeroxclub, they agreed to pay me for the higher price I pay for the system t have to compensate by providing me with an extra camera. I would like to thank them for their excellent customer service in resolving my issue.