Review on Nilight 3Inch 42W 2PCS LED Cubes: Upgraded Spot Flood Combo Beam Square Pod Lights for Offroad Vehicles - 2 Years Warranty (14025C-B) by Buddy Colbert

Therefore, the assembly design leaves a lot to be desired. Small cups with a hex head on the side came with a flat lock washer and nut. It's a real pain to get the nut into her locked position. You will need tweezers or needle nose pliers and patience. Once I had everything together and placed it on the Jeep, I positioned the headlights the way I wanted and tried to tighten the hex but couldn't. Apparently I needed both washers in the set so the nut doesn't come loose from its fixed position, my needle-nosed players don't reach there to grab it, and my smallest thin blade opens and wrenches don't fit in there either. I also didn't enjoy fitting it to the car with my special mounts. I have to undo this and repeat the whole process to install them properly. I think it's doable, but all the money I saved was wasted. If I had to do it again I would buy a better set of lights that are better designed. My understanding is that these are bright lights and work well, but I had one of the very small hex head screws that was just loosely holding the bezel in the box and it would not tighten, it was taken out of the case, I stuck it in place. with some silicone. So yeah, good value for money, but overall I'm not that impressed with this moment and I'm not looking forward to removing and reinstalling things.