Experience Ultimate Off-Road Performance With NAOEVO LED Light Bar - 240W And 24,000LM Review

One of the frustrating and misleading ways to advertise LED lights is to list the equivalent incandescent light wattage instead of what they actually consume. I mounted 4 of these LED lights on my 32HP diesel tractor and 2 similar LED lights on my 32HP diesel mower. Although it would be nice to put a 700W light bar on the tractor's front end loader the alternator can only supply 40 amps. My Ferris 5000Z mower's alternator is rated at 30A.I purchased these lights based on reviews and they are…

After 3 weeks I really do like these lights. They are bright but didn’t really make me so wow they are so bright. Kinda wish they had a bit more of a spot light feature then a flood.I siliconed the housing to try and make it more waterproof and still have condensation on one of them. For the price though doesn’t bother me that bad if I get a year or two out of them. Installled on my front bumper

Super bright, very affordable. I put them on a back rack for additional backup/salter/work light. I like the mount compared to most work lights can angle it the way you want. Cant speak to durablity/water resistance yet as ive only had them for a couple snow storms so far. The only negative I have for them(and it not a big deal at all) is that the wires come out of the bottom right side of both lights. When you mount on a back rack you have longer wires on the right side vs left side. Again not

Installed on my 2020 50cc scooter, just wired it into my high beam switch and easy day! i have no real experience with this stuff but did it in less then a couple hours! i added my own extra mount to keep it straight on my scooter! Works fine! The Chinese scooters have low amps so it’ll light up more when I brake or the engine is running high. It’ll visibly flicker and get low brightness when at normal idle because of the scooter not the light. I’m going to hopefully fix that with a different…

I was skeptical at first due to the price but I ended up buying a set, installing them and loved them so much on my way to work the next morning, I ordered another set to come in later that day and now have 4 of them on the front of my Jeep TJ to turn night into day. What’s also great at least with the TJ, is You can easily snip the leads to your original fogs and wire the lights directly to them without issue and the process took about 30 minutes only due to rusty bolts on the old fogs. Will…

I bought these and the some of the ones with just the round led indents that were nine inches wide. I wish I bought just these although the others were great for a flood style light.I put these on the front of my tractor to supplement the factory brights and holysh. did they make night back into daylight! I couldn't believe how far I could see. like a half mile across a field.The only knock on them is the stamp steel mounting bracket is kind of chincy compared to how they used to come. Would…

Easy install once I figured out an attachment method for my rack. I have 4 lights on 3 circuits with dimmer switches. I have not taken them yet on a trip however very happy with the level of lighting when I tried them out locally. I read about moisture ingress issues, it rains a lot here, not issue so far but I gave them 3 stars because I can't confirm either way at this time. Now these are noted at 120W @ 12V so would consume 10amps. My meter has them at about 2 amps at 100% intensity so each…

I installed these on my concrete truck. They light up the world. If they can survive 3 months in my world they will last forever on a car or pickup.

I hook the lights up on my 2015 Ford f350 4x4 they were pretty easy to install not much to instruction. Brightness was really surprising they light up my front acre of lawn and across the street. Thinking about buying a second set for the truck.

These lights are much brighter than I imagined they would be.Easy to install, easy to aim. Sturdy construction.The only drawback I have found is that they completely block ham radio frequencies. I have not upgraded the wiring nor added chokes yet, hopefully that solves the problem.Still, good value for the money.

There was a problem with the nuts pulling out during installation on one of the light bars. This made the light loose and unusable. Customer service was excellent in addressing the problem and sending out a new light bar. They were very helpful and easy to work with.

Good quality insulated wires on the lights.Very bright but the brackets seem cheap. I'm afraid though the cold cycles it'll crack over time.We shall see

Surprised at how simple the design and setup are. Installation took like 5 minutes including hooking them up to a switch, which is dope because I am not that handy. 5 stars all day, I'm probably going to buy more

BAUGHT THESE LIGHTS & I REALLY LIKE THESE LIGHTS, SUPER BRIGHT NICE BEAM.HAD A PROBLEM WITH MOISTURE IN THE LIGHT BUT THEY REPLACED THEM NO PROBLEM RIGHT NOW.GOOD PEOPLE TO DO BUSINESS WITH.THANKS FOR THE HELP

I must qualify my review-I installed these lamps on a log truck and a hood 45% of operation is on rough, steep (10% plus) winding gravel roads. I was very impressed with the output as I primarily need enhanced peripheral illumination. To that extent the lights far exceed my expectations.However, the vibrations of off highway operations result in premature failure of the mounting system. I’m fabricating more robust brackets from schedule 40 pipe in hopes that the lights will continue their…

Besides missing washers the ones supplied would not fit onto the bolts! In addition, the pre installed nuts on the light were too small. They just spin when you tighten the bolt. You can't get a wrench on the nut because it's recessed into the light. Pretty bad quality control. On the plus side the lights are pretty bright.

Easy to install the mounting brackets are sturdy, they haven’t taken on water yet even after going through countless mud pits and pressure washings, for 7 inch lights and the price they’re really bright, but I wouldn’t use them for a spot light, radther a flood light for peripheral vision

I have 2 of these that I mounted on the back of my 2014 Kawasaki Mule 4010 4x4, and they have been great. I purchased these in 2019 and have been using them every since. The mule doesn't have reverse lights, so these make backing up in the dark much easier, especially if out in the woods at night. They also work great for a work light. I can back up to my wood shed and light up the entire thing. Just have to be careful where you use them as they are extremely bright.

The lights are too big to be mounted into stock xj fog light mounts. So I had to drill a new hole. That said, they look robust and are bright at night. Time will tell if they remain waterproof.

For the price these give me wider and higher lighting than my headlights alone. If the price was higher like the high end brands I would give it less stars but for this price the quality and output was not disapointing very pleased for two 7” pods under $30. They are enough extra light for that just in case moment. I dont use them a lot im in the city mostly but I check them weekly and after I washed the truck or in the rain and they always work. I used a wire harness with a relay. The…