Review on 🌀 Efficient Cooling Fan Assembly for Honda Accord: TYC 620690 Radiator/Condenser Replacement by Boss Spangler

I have minimal auto repair skills. I was able to install it in 2 hours. It fits perfectly on my 2003 Honda Accord EXL. Steps Remove the clamp from the large hose connected to the radiator. Expect some spills and drink some of the coolest to fill up. Disconnect the coldest reservoir hose from the radiator. Remove the top 3 nuts and the top bolt [it might break, get the matching nut and bolt from ACE. You can use something to loosen the rust so it doesn't crack. There is a plastic cover on the left corner of the fan assembly that can be easily removed. Now disconnect the 2 upper electrical connections and the lower right electrical connection. Now lift the fan assembly up. a bit and try to take the pressure off the zip ties [you can reuse them or if you cut them you'll have to buy new ones. Now pull out the fan. Remove the metal cable adapter [you may need a new nut and can be difficult to remove without cutting. Attach the metal retention adapter to the new fan assembly. Install the new fan in its place, press the cable ties. Connect the wires, tighten the top 3 nuts and bolts, connect the large hose, fill the reservoir and connect the small rubber hose. Reattach the left plastic cover. If I do it again, I can do it in less than 30 minutes.