Review on Ankuoo Dimmable Wireless Control: Revolutionize Your Space's Lighting by Nicole Hunter

***** Updated 7/1/21 ***** Three lights out of sync with remote and glowing at different brightness levels or not working at all won't turn on. Re-timing the lights helps temporarily, but then starts getting annoying again. I replaced those bulbs with dimmable LEDs and installed a Leviton wall switch dimmer. No more irritation! *****Original rating - 4 stars***** I have a 3 bulb light fixture so I bought two packs (4 bulbs). Initially, one remote could not control three bulbs together because they were paired with different remotes. In order for three bulbs to work with one remote, you need to put the bulbs into pairing mode: 1.) Turn on the light and cycle the power switch 5 times - the bulbs will blink. to indicate that they are ready to be paired with the remote control. 2.) Press and hold the power button on the remote you want to connect for one second. 3.) The lights will stop flashing and the selected remote will be paired. You use a wall switch to control the bulbs and want the bulbs to remember their last brightness setting, you have to use the remote to turn them off and then turn them back on. and then use the wall switch.