Review on 🖥️ Black Mind Reader Sit and Stand Multipurpose Home Office Computer Desk Workstation by Sidewinders Murphy

The frame of the table is lightweight square tubing that is spot welded on 2 sides only so don't expect much strength. If you have the Attach cross-section, the tubes bend while you tie the screws. There are also 6 rollers, 4 for the table and 2 for side storage of the computer. These rollers are screwed into tubes that have a nut welded to them. The problem is that when these nuts were welded in at the factory, the molten beads from the weld got into the threads of the nut and prevented the floor rollers from being screwed in. As a result I had to use a tap to trim the nuts.I'm lucky enough to have these tools but obviously has the average consumer may not be so lucky.Finally, there are knobs that control the height of the table and the position of the front table, made of plastic molded over a couple of metal studs. When trying to attach the tables, the bolt slips inside the plastic case when turning the handle. Thus, the position of the table can be fixed, but not rigid enough. So the overall design is good, but the production and quality control sucks. The table is made in China.