Header banner
Revain logoHome Page
computer chair metta samurai s-3.04 for executive, upholstery: textile, color: gray logo

Computer chair Metta Samurai S-3.04 for executive, upholstery: textile, color: gray Review

101

·

Average

Revainrating 4 out of 5  
Rating 
3.9
Home and Kitchen, 🛋️ Furniture, 🪑 Home Office Furniture, 🛋️ Furniture

View on AmazonView on ЯM

Media

(6)
img 1 attached to Computer chair Metta Samurai S-3.04 for executive, upholstery: textile, color: gray
img 2 attached to Computer chair Metta Samurai S-3.04 for executive, upholstery: textile, color: gray
img 3 attached to Computer chair Metta Samurai S-3.04 for executive, upholstery: textile, color: gray
img 4 attached to Computer chair Metta Samurai S-3.04 for executive, upholstery: textile, color: gray

Photos by authors

(42)
img 7 attached to Computer chair Metta Samurai S-3.04 for executive, upholstery: textile, color: gray
img 8 attached to Computer chair Metta Samurai S-3.04 for executive, upholstery: textile, color: gray
img 9 attached to Computer chair Metta Samurai S-3.04 for executive, upholstery: textile, color: gray
img 10 attached to Computer chair Metta Samurai S-3.04 for executive, upholstery: textile, color: gray

Description of Computer chair Metta Samurai S-3.04 for executive, upholstery: textile, color: gray

Ergonomic office chair with "MultiBlock" synchro rocking mechanism - thanks to separate synchronous tilt of the back and seat, it allows the body to periodically unbend, which improves blood flow and stretches the back muscles. Advantages: Absolutely ergonomic shape of the backrest corresponds to the anatomical shape of the human body, gives the chair stability with maximum deflection. Adjustable lumbar support: steel chrome plated. The two-zone adjustment of the seat stiffness allows you to achieve maximum comfort (the seat can be made softer or harder), as well as, if necessary, adjust the seat angle due to the different tension of the front and rear zones. Heavy-duty steel frame back and seat, plated in mirror chrome. Possibility of fixing the chair in any deflection position. Adjusting the depth of the seat using a special slider provides an ergonomically correct fit for the user in the chair, creating additional comfort and convenience. It is possible to fix the seat depth in five positions. The swing center shifted forward allows the feet of the seated person to remain on the floor when the chair is tilted, the vessels are not pinched - a feeling of lightness in the legs is preserved. Five-beam mirror cast with anti-recoil polyurethane rollers. Anti-recoil polyurethane rollers provide additional safety of operation of the chair: without load - prevent accidental movement of the chair, while sitting - allow you to move easily. Rollers are durable, silent, do not leave marks and scratches on the floor, increased diameter (60 mm). Removable 3D headrest made of perforated wear-resistant NewLeather material provides perfect head support in any position. Adjustable in height, depth, angle of inclination. Headrest frame: steel, plated with mirror chrome. Adjustable 4D armrests are adjusted to the individual characteristics of the user''s workplace, unload the shoulders and forearms of the seated person, are adjustable in height, angle of rotation, and also allow you to change the distance between the armrests. Back and seat upholstery materials: heavy-duty mesh fabric reinforced with aramid fiber. The mesh fabric, reinforced with high-strength aramid fiber, allows your body to "breathe" freely, maintaining the temperature balance, excluding any overheating zones at the points of contact. Polymer woven fabric with incredible strength and durability.
Hide

Reviews

Global ratings 101
  • 5
    49
  • 4
    21
  • 3
    9
  • 2
    11
  • 1
    11

Type of review

Revainrating 5 out of 5

Valuable purchase, nothing but pluses!

I will try to describe the whole range of emotions that I experienced. I do video editing and spend 8-15 hours in a chair. Recently, the gas lift on the old chair began to act up, and I came to the conclusion that I deserved a more comfortable chair. At first I was sure that I needed a gaming chair, I went to several stores, sat in different chairs and came to the conclusion that most gaming chairs in the price range up to 20,000 are of very poor quality and not at all comfortable. And then I…

Pros
  • - Quality of materials and mechanisms - Appearance - Price - Comfort - Functionality - Soft wheels - Ease of assembly
Cons
  • - Backlash of the armrests (not critical for me) The left backlash is a little more than the right one. - Rare squeaks in swing mode (they are treated with grease for a long time) - If you sit only on the net, it will be harsh (I ordered a pillow from the manufacturer for 25mm, and I also want to put a regular seat cushion on top) - Chrome - if there were other color schemes, chrome would definitely not choose. - Pretty high "lowest" position, if you put a pillow, then even in the lowest position you sit quite high. - A part of the sticker from the complaint cut off by Player. Ru, on which the warranty period of 10 years is indicated.

Revainrating 2 out of 5

I don't want to spend my money on this item.

Development is good. Bad performance. Didn't even use it and didn't remove the stickers. Didn't even finish it. Never sat down. Lubricated with high-quality grease the contacting metal parts of the chair so that it would not creak. When I received the chair, the courier said that the store did not open the packaging. According to my observations, these chairs are driven in heaps at the factory, from which the quality control department cannot cope, more people are needed. The 2022 plant of a…

Pros
  • - Instead of stupid clumsy pads on gaming chairs, there are adjustable supports (under the head and lower back). Under the lower back, it is regulated, of course, in depth and in height, about 2.5 cm up and also down. - The old unreliable lumbar support system was replaced with a support of a different design. Seems to be more reliable. - The headrest is now manually adjustable without hexagons - there are round knobs. - Pants and a shirt will not stick with sweat, and in St. Petersburg with an ordinary chair this was the case in the summer. - I bought it in ONLINE TRADE. RU: an armchair 17,480, mind you, without a markdown, new (and at the factory itself it costs 22,149), delivery 250. (and at the plant itself it costs 2,439). Cheap, while I briefly saw the cheapest ergonomic chair from 45,000. Cheaper than normal game ones, which are about 30,000. begin, judging by the number and content of negative reviews. And this is a chair with a multi-block, not a brittle top gun, and four-way armrests. - The plant says that the stiffness of the mesh changes, but in reality the method described in the instructions is a slope. It seems that (although it is not written in the instructions) you can completely unscrew four screws, which, using two plates, press the mesh against the frame with tension and make the seat mesh sag like a hammock. You can replace the mesh on the seat yourself. - The thickness of the frame metal is more than 1 mm, it seems, I looked at the diagonal cut, perhaps this visually added thickness. - Above the gas lift there is an iron plate of the multiblock. If he manages to blow it up, maybe the plate will protect him. - 4th class gas lift. - White-clear grease is applied at the factory, but I found places to add it. - It turned out that the armrests on top are not plastic, but a little soft. - Other advantages are described by the manufacturer.
Cons
  • - They did not put two 5 mm hexagons, but they appear in the inventory. The inventory is named S-3.03. And under warranty, you need to return the entire set. An attempt by the factory to evade responsibility? - During assembly, I found two thread breaks in the seat mesh. Inconspicuous, but critical. Similar to meltdowns. In one place, a colored fiber (a ribbon of parallel thin fibers) and a perpendicular black one (like a thin shiny plastic wire) are torn. In another place, only the colored fiber is torn, and not completely, but exactly in the middle of this ribbon, which consists of threads of "hairs", but rested on the remaining extreme "hairs". Just a hole, no fluff like a rope breaks. Either the worker smoked at the factory above the seat, or sparks from welding or some kind of file got into it. And in places of holes, the weaving spreads under its own tension, I didn’t even sit down even once. I bought a dark brown chair, in fact the color matches, and there was a sticker on the seat with the designation “maroon”. An attempt by the factory to evade responsibility? - Rigid mesh, almost a stool. The pillow case is the same. - I'm not an expert, but the black type of plastic fiber in it is embarrassing. Although it was just the color that gave a visible defect: on the inversions into the chrome-plated frame of the back, the hairs are frizzy, as if from friction. - You can't replace the mesh on the back. It is clamped in a metal plate twisted with the letter "q" or "G", the lower edge of which is perpendicularly welded to the chrome rim, i. E. directly to the frame of the back itself. There are spot growths from welding, it seems that there is a linear one. There are wide not welded places, the paper crawls through. - The back support mechanism is point-welded. Thick metal loses its meaning. - Blocking the rollback of the wheels in an unloaded state is a dubious function. I even moved the chair, which was not fully assembled, often. How to vacuum the floor, etc.? - Some welds have golden spots. I don't know what it is. The size of the seams seems to be normal. - The back support collar rests against the bars when changing its height.

Revainrating 3 out of 5

Average quality, not an outstanding product.

Replaced my old Samurai S-1 chair after 4 years of use. Actually, the only drawback of that chair was a creak that appeared in the second year, but the creak was corrected by the first treatment of everything under the seat with a silicone spray. And even with the first chair, I ran into a gas lift marriage, broke down in the first month, changed it to a new one, which works like that. Reason for replacing s-1 with s-3.04: 1. Adjustable armrests - the old one had ordinary ones and they…

Pros
  • - The ability to customize everything for yourself - Mesh back and seat - Rolling mechanism - smooth and soft
Cons
  • - Smell from armrests. Gone with time. - Like the previous model of the chair from this manufacturer - it creaked after about a year. - Unlike the old models, here the creak is no longer only from the multiblock

Revainrating 1 out of 5

Think twice before you buy-the product is disgusting.

Soft metal in the supporting structure, apparently steel - Chinese rawhide. I gave 16k for this chair at a discount in the express office store. In short, the chair is not finished in relation to the supporting structure, the steel is soft. . the store replaced the rolling mechanism for free according to my complaint. to remove this mechanism from the stem of the gas lift, I had to use the power of Hercules, P. S. additionally strengthened the junction of the chair back and the rolling…

Pros
  • - Mesh, it is very comfortable to sit, nothing sweats and the legs do not numb due to the fact that the back and seat are not connected to each other. - Headrest - Lumbar support - Many variations of anatomical settings
Cons
  • - the metal is bent at the place where the backrest is attached to the rolling mechanism, i. E. with the locked rolling mechanism in a strictly vertical position, you no longer sit upright, but slightly leaning back. but apparently my 100kg is to blame here. - the rolling mechanism broke down, something inside (something is a plastic position lock, plastic!) clicked and the chair does not return back, although it seems like the rolling lock mechanism works for more "folded" positions. (replaced by complaint the rolling mechanism) - backlash because not directly connected to the seat, but through a rolling mechanism. - in less than a year, the gas lift stopped holding, in 50 seconds it descends from the max. to min. (replaced gas lift on complaint) - an annoying backlash appeared in the centering plastic sleeve of the gas lift rod, you can only sit in the deflated position, otherwise if you sit with the gas lift raised to the max position, you feel like you are sitting on the mast of the ship during pitching. (the gas lift was replaced, but the problem remained even with the new part) - the armrests dangle with the sound of rattles, although they are very conveniently adjusted. - there is no knock-down and solidity, everything dangles and backlash due to the design features of the chair.

Revainrating 5 out of 5

I do not cease to rejoice at the purchase, a very good deal!

At first glance, the price of 20 thousand (taking into account discounts and promotional codes) is a bit high, but perhaps it only seems so. Due to the huge number of adjustments, it is very difficult to immediately adjust to yourself, after the chair it seems that everything is tight and uncomfortable everywhere, but over time you get used to it and adjust it for yourself, in fact, this is only the first impression, but I can say this, this chair is more comfortable than most office chairs, in

Pros
  • Huge number of adjustments Looks cool, but maybe someone will not like chrome, in this case there is with black Fixing the angle of inclination is more useful for me than the swing mode The mesh with a very interesting coating, as if a little rubberized, does not allow you to slide like on skis You can adjust the tension of the mesh, but I still don’t really understand how Soft fabric under the knees - does not press like a piece of wood Good thick metal and frame
Cons
  • In fact, there is no swing mode or it is very tight The chair still has a little play in some places, but this is not critical The headrest wobbles. Yes, if you do not screw it tightly (but then you will need to constantly get up and unwind it to adjust), it starts to stagger, not very pleasant, but you can find a compromise between the tightness of the adjustment and its staggering. The wheels, they seem to be soft, but you may have to buy a rug, if the chair is rolled on the floor without load, then not all the wheels spin, they can scratch the floor. They also didn’t put a couple of plugs, it’s not critical, but it’s a shame, I will contact support, I hope they will deliver From the rocking positions, more precisely from the three fixation positions, in order to adjust it differently, you need to raise the plastic lever and swing it back so that the latch comes out of position, someone is a plus, someone is a minus (at first I was afraid that the chair was broken, but no )

Revainrating 4 out of 5

The product did not disappoint, the quality pleases.

“In general” - for your money (if you buy within 20k, and not for 26k, as originally set by the manufacturer) the chair is better in terms of ergonomics and comfort for my weight and height, with more or less flexible adjustments and in a grid, I don't think it can be found. I also feared that the chair would become an attractive scratching post for cats, but I haven’t observed any “assassination attempts” yet. Three cats, all three are indifferent to the chair.

Pros
  • + The back and. well. below the back don't sweat :) + Adjustment of the headrest allows you to adjust it to any person for themselves, in any position of the chair, as comfortable as possible. + The armrests are very comfortable, tactilely pleasant and slightly soft (I don’t know what material, some kind of elastic plastic chtoli). + Sooo strong construction, metal frame, stops . everything looks very soundly. With my 110+ kg, I’m not afraid to sit / sway on it. The mesh also looks and feels very sturdy.
Cons
  • - Rigid and creaky lumbar support, this is a design feature. It is adjustable, but very clumsy. This is the weakest part of the chair in terms of ergonomics. It will be necessary to come up with something with him, to make some kind of podklak chtoli, otherwise it’s straight . rubs. - Everything backlash, that's absolutely everything - armrests, headrest, rocking mechanism, seat. At first, it even creaked very unpleasantly somewhere, I could not determine where, but after a couple of days the creaking passed. In general, all backlashes and creaks are not critical, they do not create discomfort . at least for now. But the hand of the “2022 manufacturer with Chinese components” is directly felt everywhere. - The mesh is just so very synthetic, condo, tactilely not very pleasant. But this is also a plus, since the fabric is tactilely more pleasant and will stretch faster and be easier to damage. – The gas lift does not hold “height”. From the highest position gradually descends. Judging by the reviews, all heavyweights have this problem. - Appearance is still quite "". Chrome elements do not go well with mesh in any color. I took the beige one, on the video reviews it looked more or less like it, but in live it's still some kind of awkward . a matter of taste, of course.

Revainrating 4 out of 5

The right product for me, the price suited me.

somehow managed to align these slats, only a large lever helped. But it is not possible to relax these screws, and they are just responsible for the softness of the seat, judging by the instructions

Pros
  • The chair is good, the most comfortable of those on which I sat
Cons
  • The assembly tool is included, rather weak, to break the edges on the hexagon . for the first time I see this, but it’s so, rather nit-picking the edges were torn off against the mechanism for adjusting the rigidity of the mesh tension. In general, judging by everything, this structural element is stuck, because. even a screwdriver at maximum power could not move these screws.

Revainrating 5 out of 5

I can't stop being happy with the purchase, a very good deal!

In general, I am very pleased with the chair, it is very comfortable for my height. But upset the fact with the gas lift. I am rewriting my review again. In general, the problem with the gas lift was solved. My carelessness. There is a tight cover on the gas lift button, it feels like it is the button itself. It is removed with difficulty, so I did not immediately think that it was the cap itself. Although it was indicated during assembly in the documentation, it looks larger in the picture and

Pros
  • Everything came up, the set is complete, there were enough hardware, the threads are normal, not scratched.
Cons
  • Everything would be nothing. But when I assembled the chair. Everything works except for lifting and lowering. I'll figure out what's wrong with the gas lift, and then contact support if it's not working.

Revainrating 5 out of 5

The quality is at the level, I am satisfied with everything.

Got pros: Multifunctional chair, long warranty. The backrest reclines well, there is a blocker that will not allow you to hit your back if you suddenly get up from a lying position. The seat is adjustable forward and backward, adjusting for yourself is quite simple. Comfortable insert for the head and lower back. I work remotely, this is the best purchase for comfortable work. Has some cons There are no disadvantages. Do not forget to remove the stud from the gas lift, this is not in the…

Revainrating 4 out of 5

The right product for me, the price suited me.

As a result, I am satisfied with the chair as a product and definitely recommend it! Grover need to put their only. I recommend the manufacturer to check the package! On the one hand, the approach to business is good: excellent packaging, assembly tools are included, there are even gloves, but on the other hand, saving on matches (grovers) spoils the impression of a good chair . For such a price and a general approach to packaging, you expect to see one bolt, washer more than necessary.

Pros
  • Excellent, comfortable chair, good materials. I recommend Excellent packaging - everything is wrapped, laid. Good assembly instructions.
Cons
  • Insufficient set of fasteners for assembling the chair, namely, 3 growers are missing! As a result, they propose to fasten the seat to the multiblock simply with a bolt-nut, how quickly it will unwind is an open question .

Revainrating 4 out of 5

No complaints, I recommend to buy.

We bought it online, brought a cut-out headrest (there was no possibility to check right away, the courier dragged the box and sped off), changed it after a complaint within 10 days (they brought a replacement to a distribution point near the house), there were also extra parts in the kit, but we honestly returned them together with the headrest)))

Pros
  • The chair is very comfortable, bought because. There is already 1 of these. Everything is regulated, maneuvers, the buttons are pressed. Just right for me with a problem back
Cons
  • In the configuration and color of which I wanted only the chair of the head, but I wanted a smaller office chair.

Revainrating 4 out of 5

What you need, a cool purchase, I advise you.

The chair is light, easy to move from place to place, and does not spontaneously move. overall satisfied, although the chair is not perfect. There was no better solution in terms of price / functionality ratio at the time of purchase. I took it just before the start of the pandemic to replace the previous one (from another manufacturer). This is definitely better than the previous one: there was no desire to sell after a few years of use

Pros
  • combination of lightness and functionality in summer, the back and "fifth point" do not sweat
Cons
  • lumbar support is not adjustable in height, not suitable for height 175 (must be taller) soiled material: the headrest and seat (I took an additional perforated cover on the seat) were saturated with the color of the clothes (the headrest is due to the fact that I hang clothes on it before going to bed) the wheels clogging with dirt (especially women's hair) begin to creak when the chair is moved, the manufacturer did not make instructions on how to disassemble and clean them, it is impossible to disassemble the catfish the mesh rubs jeans over time, so it's better to order a seat cover

Revainrating 5 out of 5

The quality exceeds all expectations, I recommend to buy.

Great chair in my opinion. It is convenient to work and rest on it. Nice back and seat. Nothing sweats anymore. Not hot, what you need in the south. Legs do not make noise, do not leave marks on the floor.

Pros
  • Multifunctional chair. Nice materials. It is comfortable to sit, there is a convenient function of reclining to the extreme position back. So to say the rolling function. No fiddle.
Cons
  • It is inconvenient to connect the back to the seat, you need some kind of platform, hill or bedside table. Slightly squeezes the seat on the right leg. It’s bad that it doesn’t ride by itself, you have to move it, you have to make an effort.

Revainrating 5 out of 5

I was surprised by the quality for this price.

Pros below: The chair can be self-assembled from the box, there is an instruction, a set of necessary hardware and a set of keys. Even gloves are included. The chair is good, many adjustments, it is convenient to adjust any position. I took it to work on a computer with a regular desk. It is convenient to adjust the armrests to the level of the table. 5 star functionality. Its cons: creaks slightly, read reviews that it goes away with time, although it tightened everything all the way

Revainrating 2 out of 5

A bad product, not worth the money.

To assemble a chair is a whole quest, in the assembly instructions step by step in a bunch for different models of chairs and this is for such a price! One of the half-head bolts with stripped threads. At the same time, these pointed bolts actually spoil the frame of the chair, ingeniously. With a weight of 76kg, the mesh began to sag after 2 weeks. What will be next? The lumbar support is convenient for me if you don’t pull it hard, but at the same time it starts to hang out or something when…

Pros
  • cute Lots of adjustments It's not hot on it.
Cons
  • In general, everything is bad, from the instructions (for which the Japanese would have made themselves hara-kiri if they saw it), which is clearly Sino-domestic creativity, to exploitation.

I do not recommend to buy if you want to save your nerves. Spend several weeks or months on a complaint. And the employees of the company will be rude to you and say that the buyer is to blame. The attitude is just disgusting. As an example of marriage, I attach a photo. Think twice before you buy!

Pros
  • If not a marriage, then a comfortable chair
Cons
  • Every second chair from the manufacturer Metta is defective. This is discovered when assembling an already purchased chair. After that, endless complaints begin, delivery-fences of spare parts at the expense of the buyer.

Revainrating 5 out of 5

I'm impressed! Exactly the product deserves your attention.

Everything is fine, and then we'll see. <:^) I would like to express special thanks to the seller ONLINETRADE. RU, this is not the first time I buy goods from him. They call back to clarify the order, delivery is fast and without transfers, polite couriers.

Pros
  • So far, there's nothing to complain about. The chair is very comfortable. Everything is well packaged. The box even has handles for easy carrying. This is a big plus. The details of the chair are all in individual packaging (stretch and bubble wrap). All components are in place.
Cons
  • When installing the seat, I ran into a problem, some of the bolts were already very tightly twisted. I had to use a mallet to unscrew the fastening strips.

Revainrating 5 out of 5

Valuable purchase, nothing but pluses!

I read reviews about him all over the Internet. I didn’t understand where so much negativity comes from - either the lumbar support is low, or the armrests move by themselves, or the delivery is understaffed, it is difficult to assemble, etc. None of the above has been confirmed. I, if anything, 192 cm, weight 103 kg - the emphasis is right, you can even make it higher, the headrest is comfortable, assemble - half an hour - if you watch the film at the same time. Yes, the details are not light,

Pros
  • Comfortable, lots of settings, looks great

Revainrating 5 out of 5

The best thing I've ever used, I recommend it to everyone!

Different pros: I am delighted. Everything that is possible is regulated. I set everything up very quickly. The build looks and feels solid and of good quality. Someone complained about the backlash of the armrests. In my opinion, everything is in order. The armrests unfold in a horizontal plane, so a little play is quite appropriate, it doesn’t bother me at all. With an emphasis under the lower back, everything is also OK, it is conveniently adjusted both in height and in reach. The seat is fi

The wheels are good, but they collect dust / debris. are easily wiped off. Store delivered faster than promised. Considering the discount, it's a good price. For the full price (22,000) I would not buy it. Has pros: Comfortable armchair. Assembly is elementary. Well . 10-15 minutes. Everything you need is in the kit. Its cons: A few days have passed, a little creaks if you wiggle a little. With a large amplitude, there are no sounds, but if a little bit, then it creaks a little. I'm not…