Review on Computer chair Metta Samurai S-3.04 for executive, upholstery: textile, color: gray by Adam Konowski ᠌
I don't want to spend my money on this item.
Development is good. Bad performance. Didn't even use it and didn't remove the stickers. Didn't even finish it. Never sat down. Lubricated with high-quality grease the contacting metal parts of the chair so that it would not creak. When I received the chair, the courier said that the store did not open the packaging. According to my observations, these chairs are driven in heaps at the factory, from which the quality control department cannot cope, more people are needed. The 2022 plant of a popular Swedish-Dutch brand has the same problem, although inspections from abroad sometimes come every week. And they don't report the details. And then what happens anyway. What can we say about the METTA plant? But that's no excuse. Why is the price at ONLINE TRADE. RU much cheaper than at the factory? I immediately understood what could be causing this, but people are buying from there, the number of seats is decreasing, there was a successful video on YouTube. I took a risk and bought - that's the result of the risk. Miracles happen, that's for sure. But not with "you". ONLINE TRADE. RU so far goes to meet me under the guarantee, but not smoothly. I wanted to exchange the seat, they did NOT give me a direct refusal, they sent a complaint. At the last moment, it turned out that the seat would not be changed, not repaired, they would take away the entire chair and would not even change it entirely, because it was removed from sale. But the factory should still produce them, the fifth series of chairs has not come out, right? I don't know why the complaint store can't order. When the courier picks up the chair, draws up a transfer act in two copies, according to which I will receive the money back at the point of issue, as the courier said. Of course, he is young, in a hurry, makes mistakes in the transmitter, has no spare forms. Sent him for new forms, should arrive the next day. All this has been going on for a month, although I didn’t answer the manager right away on the ONLINE TRADE. RU website. I still want this chair. If someone likes the concept, it's worth the risk to buy, but in a store that won't give up with a guarantee. In short, like this. But in the kit there is a tape measure and rag technical gloves!
- - Instead of stupid clumsy pads on gaming chairs, there are adjustable supports (under the head and lower back). Under the lower back, it is regulated, of course, in depth and in height, about 2.5 cm up and also down. - The old unreliable lumbar support system was replaced with a support of a different design. Seems to be more reliable. - The headrest is now manually adjustable without hexagons - there are round knobs. - Pants and a shirt will not stick with sweat, and in St. Petersburg with an ordinary chair this was the case in the summer. - I bought it in ONLINE TRADE. RU: an armchair 17,480, mind you, without a markdown, new (and at the factory itself it costs 22,149), delivery 250. (and at the plant itself it costs 2,439). Cheap, while I briefly saw the cheapest ergonomic chair from 45,000. Cheaper than normal game ones, which are about 30,000. begin, judging by the number and content of negative reviews. And this is a chair with a multi-block, not a brittle top gun, and four-way armrests. - The plant says that the stiffness of the mesh changes, but in reality the method described in the instructions is a slope. It seems that (although it is not written in the instructions) you can completely unscrew four screws, which, using two plates, press the mesh against the frame with tension and make the seat mesh sag like a hammock. You can replace the mesh on the seat yourself. - The thickness of the frame metal is more than 1 mm, it seems, I looked at the diagonal cut, perhaps this visually added thickness. - Above the gas lift there is an iron plate of the multiblock. If he manages to blow it up, maybe the plate will protect him. - 4th class gas lift. - White-clear grease is applied at the factory, but I found places to add it. - It turned out that the armrests on top are not plastic, but a little soft. - Other advantages are described by the manufacturer.
- - They did not put two 5 mm hexagons, but they appear in the inventory. The inventory is named S-3.03. And under warranty, you need to return the entire set. An attempt by the factory to evade responsibility? - During assembly, I found two thread breaks in the seat mesh. Inconspicuous, but critical. Similar to meltdowns. In one place, a colored fiber (a ribbon of parallel thin fibers) and a perpendicular black one (like a thin shiny plastic wire) are torn. In another place, only the colored fiber is torn, and not completely, but exactly in the middle of this ribbon, which consists of threads of "hairs", but rested on the remaining extreme "hairs". Just a hole, no fluff like a rope breaks. Either the worker smoked at the factory above the seat, or sparks from welding or some kind of file got into it. And in places of holes, the weaving spreads under its own tension, I didn’t even sit down even once. I bought a dark brown chair, in fact the color matches, and there was a sticker on the seat with the designation “maroon”. An attempt by the factory to evade responsibility? - Rigid mesh, almost a stool. The pillow case is the same. - I'm not an expert, but the black type of plastic fiber in it is embarrassing. Although it was just the color that gave a visible defect: on the inversions into the chrome-plated frame of the back, the hairs are frizzy, as if from friction. - You can't replace the mesh on the back. It is clamped in a metal plate twisted with the letter "q" or "G", the lower edge of which is perpendicularly welded to the chrome rim, i. E. directly to the frame of the back itself. There are spot growths from welding, it seems that there is a linear one. There are wide not welded places, the paper crawls through. - The back support mechanism is point-welded. Thick metal loses its meaning. - Blocking the rollback of the wheels in an unloaded state is a dubious function. I even moved the chair, which was not fully assembled, often. How to vacuum the floor, etc.? - Some welds have golden spots. I don't know what it is. The size of the seams seems to be normal. - The back support collar rests against the bars when changing its height.
New products
Comments (0)
Similar reviews
Top products in 🪑 Home Office Furniture
Gaming chair Chairman GAME 17, upholstery: imitation leather/textile, color: black/red
87 Review
Computer chair ThunderX3 TC3 gaming chair, upholstery: faux leather, color: Arctic White
59 Review
Computer Chair Bureaucrat CH-330M Office, upholstery: textile, color: dairy
67 Review
Computer chair Metta Samurai S-3.04 for executive, upholstery: textile, color: black
94 Review
Another interesting products
Computer chair Bureaucrat T-898AXSN for executive, upholstery: textile, color: gray 3C1
109 Review
Sorbus Five-Drawer Dresser - Furniture Storage Tower For Bedroom, Hallway, Closet, And Office - Steel Frame With Wood Top And Easy-Pull Fabric Bins In Marble White With Black Finish
41 Review
Sorbus Diamond Weave Room Divider: Extra Wide 6Ft. Tall Privacy Screen - 8 Panel Espresso Brown Foldable Partition Wall With Double Hinges
42 Review
Queen Size Metal Platform Bed Frame - No Box Spring Needed, Steel Slat Support By VECELO
41 Review