Review on Wolfwhoop Combo2 Micro AIO Camera & 5.8GHz VTX Integrated FC for FPV Quadcopter Drones - 25mW/50mW/100mW/200mW Power Options with Dipole Antenna by Travion Woods

I love this AIO, I didn't know I bought an AIO with Smart Audio or that it was even an AIO Camera with Smart Audio are. My only criticism is that the color coding is on the video cable. green, yellow, red and black. simple, vout, vin, +5v, ground. no, vout, vin, uart, reason. The red wire on the video connection should not be red, make it purple, blue, anything but red, red means power. That's why I gave 1 star, I also really like the camera, it looks good, it has a smart sound, what more could you ask for? (кроме онлайн-мануала) Я сделал betafpv beta75 pro (всего в наличии не было, кроме запчастей) и купил бесколлекторный FC betafpv для beta75 pro, когда понял, что уже купил эту камеру и что она был умный звук, я был очень взволнован, Bye. There is no tap on the FC for any TX pins, so I pulled the datasheet for the f3 chip and soldered the UART wire on the camera to the corresponding UART pin on the chip (it's a full PITA), but it works now so have a giant brushless quadcopter with turtle mode, OSD menu and smart sound. Please note: If you do not connect the uart cable or connect it incorrectly, the power you set with the button will be on. every time. However if you connect smartaudio turn it on in Betaflight and everything will work when you turn on the copter and you can't reach 2ft don't panic, with smart audio it turns on at 0.01mw so you can' If you are no more than 4-5ft from the quad you will need to change the power, which I think would be a problem, but if you go into the beta/butterflight console and run "vtx_low_power_disarm=ON". , it activates when you arm it, change the power you set it to and go down to 25mW when you deactivate (I wish it went down to 0.01, like when you turn it on). armed it will toggle you from 0.01mw to 25 and then just stay armed or unarmed so I can toggle between 25mw and 50mw.