Review on ORANDESIGNE Rubbermaid Kerosene Occupational Health & Safety Replacement Gaskets by Chris Peck

These six packs arrived on time. Basic instructions can be found on Revain's description/order page under the Product Description section (scroll down the page). They go perfectly with my Blitz™ cans. However, as suggested, I cut out two holes for the hinges so they can be screwed in nice and tight. With the Zepter™ jars, I just used the existing screw caps. They are raised directly onto new spouts. First I made sure the jars were empty and dry to install the vents. As suggested I used a set of drill bits to make a hole for the vents. I used 1/8", 3/16", 1/4", 3/8" and 1/2" bits in that order. There are no pieces in the jars. When I put the vent holes in the 1/2" holes, I placed the jars on the workshop floor and used my leather work gloves to press down firmly on them and snap them into place! Now that the new vents are open, the jars fill and empty without that slow gurgle, gurgle, gurgle like they used to! Great product!