Review on Calibrated Printer Plate with Pre-Assembled Filament (260) by Born Waheed

Very happy with this printer: solid build, better hobby printing, fast enough. Still testing and learning. There is a steep learning curve and not much US/North American support, but with patience and time hurdles can be overcome and satisfying results can be achieved. I can't compare to other 3D printers as I haven't used any others but I understand the learning curve is about the same. The material support is also very nice - there is quite a wide range of threads to use. I highly recommend this product if you are really ready to dive into and understand the world of 3D printing. 1 month update: Still happy with this printer. The learning curve is still steep. I experienced several failures due to my own mistakes at work and misunderstandings. My mistakes proved this printer to be very dependable, very dependable and fairly easy for the user to fix. I allowed the filament to weld and block the bottom tube and nozzle causing the extruder to damage and discharge the filament, but I was able to completely disassemble and clean the hot end. I didn't tighten the parts enough and a hot thread came out of every crevice - cleaned everything a second time, reassembled and the bottom tube cooling fan wires came loose. A quick solder to connect the extra length of wire to the fan and the next print came out beautifully - a lovely black glossy case. The better bottom pipe, heater block, heating element, temperature sensor, fan and even the original nozzle still work. They were all intact and recyclable with some cleaning. I still love this printer.