Review on Eastchina 10.5 inch iPad Air 3(2019) iPad Pro 10.5(2017) Anti Glare Blue Light Filter Screen Protector 9H Anti Fingerprint Tempered Glass Film (2 Packs) by Carlos King

Good part. Very bright, easy to install, could do a second one. Made a real difference. When I cut it to length I had an extra 6 feet. I took an extra standard 1 amp wall adapter, cut the wire and connected it to the extra length. Now I have 2. The bad news: the tape came off the first two feet of the roll, I suggest you unroll it all and use the other end. Both ends are open so you can use either end. As I rounded the corner, the line wouldn't stay straight and detached from the cabinet. Half peeled off after 24 hours. I had to use clear tape all the way to keep it in place. The LEDs are NOT HOT so it didn't really matter, just a pain. See 3rd image for arc rotation. The pictures show it is pre-sealed but you can't see it. In the last photo you can see that the wire is sealed. BTW, and it also shows the adapter switch that I need to use to turn it on and off. Notes: When you install it, it's really designed for a straight line. It can be a small "S", but it is difficult to turn 90 degrees. You can twist and rotate an arc 90 degrees, but see below. You should also get an outlet/switch ($4 with home storage). http://www.homedepot.com/p/Commercial-Electric-15-Amp-Switched-Outlet-White-LN-5/203456718 so you can just turn it on and off, otherwise you have to turn it off. Make sure you have an outlet from the outlet so the cord doesn't hang out.