Review on 👕 12in x 10ft Black and White HTV Heat Transfer Vinyl - Easy Weed & Cut Iron-On Vinyl for DIY Shirts - 2 Rolls by Sasha Hsiao

Contrary to what others have said, this is not the easiest heat transfer vinyl I have ever worked with. On the contrary, it was the most difficult material to cut that I have ever put through my vinyl cutter. After two attempts to cut it with the default settings with no visible results, I had to increase the pressure and position of my blade significantly to go through the material (more than twice that of regular self-adhesive vinyl). The rubbery feel of the material also caused my blade holder to trip over the surface several times while cutting. Weeding is also a little tricky at first, but once you separate the section from the clear film, weeding becomes very easy. There are no instructions included with the product, so you can refer to the instructions here on the product page (and how do you already know what to do with such things). When all was said and done, the vinyl bonded perfectly to my materials with a household iron at maximum power (using a press cloth and applying heat/pressure for about 30 seconds). I then did a second pass with the iron for another 30 seconds to seal everything. Vinyl finish is very thin and flexible. Almost feels like fabric. I was happy with the result, as was my client. In the end victory.