Header banner
Revain logoHome Page
Mateusz Bana ᠌ photo
1 Level
317 Review
0 Karma

Review on G Skill Trident PC5 51200 CL32 39 39 102 F5 6400J3239G16GA2 TZ5K by Mateusz Bana ᠌

Revainrating 5 out of 5

Best thing for the money, glad I did it.

What can (Unify-X, 12900KS@5200P/5000 ring): 6800-32-39-39-51 CR2 / 1.48V (46.6ns MLC, 48.1ns AIDA) - world record in air for latency for 6800-32. Constant, 100% stable. Details in the comments. 7000-xx-xx-xx-xx CR2 / you need to adjust the resistances, A.81 should work on the last BIOS 6800-32-40-40-52 CR2 / 1.37V VVDQ, 1.44V VDD, 0.9V SA, 1.08V VDDQ TX ! 6800-32-39-39-51 CR2 / 1.44V VVDQ, 1.48V VDD, 12022V SA, 12022V VDDQ TX 6666-32-39-39-51 CR2 / 1.36V VVDQ, 1.41V VDD 6600-30-40-40-52 CR2 / 146V, 1.5V VDD CR1 cannot in any form (latest bios) after 6000 MHz, leave this idea, it still doesn’t work normally on DDR-5. Turn off Lucky Mode on Unify-X, it trains the RTL block incorrectly, which essentially underestimates the net performance. For example, a properly tuned 6800-32 will be faster than a 6800-30 in a lucky mod. Yes, it allows you to cheat and achieve launch at higher frequencies or lower voltages, but you sacrifice performance. The memory is good, but very hot. I stuck an 80mm beak on the airflow. At full load no higher than 45. Feedback on the black version. Add. infa in the link to overs in the comment. All good.

img 1 attached to G Skill Trident PC5 51200 CL32 39 39 102 F5 6400J3239G16GA2 TZ5K review by Mateusz Bana ᠌
img 2 attached to G Skill Trident PC5 51200 CL32 39 39 102 F5 6400J3239G16GA2 TZ5K review by Mateusz Bana ᠌
img 3 attached to G Skill Trident PC5 51200 CL32 39 39 102 F5 6400J3239G16GA2 TZ5K review by Mateusz Bana ᠌



Updated 1 year ago
Rating has not been changed

Adding photos to my review was a natural choice to give readers a better understanding of my experience.

review_update_image_alt
review_update_image_alt
review_update_image_alt
review_update_image_alt
review_update_image_alt



Pros
  • - Hynix M-DIE - Good potential, up to 6800-30(32) in the air, up to 7000-7200 in the water, but that's if you're very lucky.
Cons
  • - Hot. Without blowing under 60gr. in karhu with the task 27-28k. For those who want to overclock, put airflow or put on water ideally. More than 50 may throw errors.