Review on 🔌 Go Power! FBL-400 Class T 400 Amp Fuse Block in Black by Blake Mannasseh

This is a great fuse box. This is a Deltec Co CFB2-400 fuse box with a Go Power sticker. Very solid workmanship and does what it should. If you ever need to replace a fuse, it's a Deltec T-400 fuse (it might be easier to find the source that way). It is difficult to install a 4/0 cable when the end of the cable has grown out from cutting. Simple trick. Cut the required amount of cable jacket (insulation) but do not remove. I rang again halfway and stripped some of the wire insulation from that end. Connect the remaining half (1/4" or so) to the end of the bare cable (leave only the tip of the cable exposed. It helps if you lubricate it with dielectric grease (which you should be using anyway). The end The cable is now compressed enough to insert (if not, press lightly with your fingers, the insulation will help it regain its correct shape/size.) Insert the cable, making sure you do not slip, trim the remaining insulation and remove the ring insert all the way in and tighten I hope this makes sense.