Upgrade Your Light Bar With NAOEVO 14AWG 240W Custom Wiring Harness And 6 Modes Light Bar Controller Review

Unless the lights are being installed right next to the battery and the battery is on the drivers side this harness is useless except for the button to change the modes. I had to create almost 20ft of a wiring harness to attach these to the back of my truck. I then had to add 5ft to the power to reach the battery as it was on the passenger side of my truck.

Your product seems great. One issue is the writing on the button. Since most people are going to install the button from underneath, and come up and over, the writing ends up upside down, as seen in the picture. The writing should be flipped upside down so when installed the way most people will install it, rhe writing will be correct.

these light are cheap made and dint last long at all they are far from water proof and stop working not long after purchase id think twice if I were you before buying these light they are inexsoensive and cheap as the oruce tag they put on them.faikure if a light

Functionality sound & ok. Not made to be a top (near the dome light)switch, but looks good. The fact that it sticks out that much bothers me but it's functional so it should be fine

Was trying to hook up some lights on vehicle and the wires started burning and smoking on us. So now they will not work. That's my feedback.

Switch doesn’t function the way they advertise. I bought their whole set up. The lights only function in the solid white mode. They don’t change modes at all . Customer service doesn’t know how or why and they don’t want to fix the issue. Return

The harness looks complete, wires could be made of the cheapest materials known to humankind for all I know.Problem with "Made in China" is they look out for Profit Margins rather than "High Quality". Complete opposite of Japanese production processes, the Japanese main focus is always Quality no matter what. They learned this from Dr. Deming of the USA. So,. I bet this harness will last 6 months before there's a failure somewhere, like the solenoid, switch or some corrosion in the cheap metal…

Looks good and well made. Unfortunately the harness from the relay to the switch were way too short for my application (Chevy Suburban). I had to buy extra 16ga. wire and splice in to make the switch harness longer.

This does not work as advertised! The mode button only powers when you hold it down. It does keep continuous power to the light to allow the light to change modes

Got this for a friends 1968 Dodge A108 van that I installed LED fog lights on, this switch and wiring harness made the job very easy, highly recommended.

Mode on switch does not function properly. You have to hold it down to "mode" switch to toggle but once you let go it switches back to the original light. Does not work as advertised on product video. Also, wire harness is very brittle especially a few inches from the connectors. Bending from the connectors will cause the strands to loose connection. Design concept of wire harness would be awesome if it works as advertised and wires were not substandard quality.

I don't know why 2 of the wiring sets where 4FT short I would understand if they where 1 or even 2 ft shorter but 4 it's way too much they beary reached the lights on my roof, disappointed.

Not worth the money did not work the way it was supposed to work with different cycles on my lights not happy with this product at all not worth the money or the time

Easy plug and play. Of course for my application the switch wire could have used an extra foot, but it all worked out fine.

Harness is to short, either it needs to be made longer or able to buy a 3 wire extension harness, I bought the Nilight extension wires but it is only 2 wire so had to add a wire for both legs. I installed on a Polaris Ranger Crew so was way to short. I really don't know what application this would even fit with wires being so short.

Product is specified as such. Only issue I had was I needed to extend the wiring to enter the driver side of my cab of my xterra as my battery is in the perpendicular position from it. It should be stated when purchasing any of their lights they will only work with their relay.

This is the BEST harness for side shooters lights . I just wish the switch would light up but Awsome harness Thanks for attention!

The switch and plug on the other side are large and won't fit through a drilled hole. difficult to route. Not long enough between hook ups for the lights. Pain in the ass to install and then won't switch the lights to the various cycles. Won't buy again.

It’s the only rocker switch that I’ve been able to find that works for 6 modes. Looks great on instrument panel and works like a charm. 👍

This item is pretty cool and 100% necessary for the lights. The lights I got were the nilight Amber and white 4". Needed to activate all modes. Works perfectly. You will have to wire it up of course and if you are not familiar with how to do that it may be a challenge. But it's not hard. I do suggest getting connectors that will endure elements. And maybe a few zip ties. Others than that? Do it.