Review on Micro2 Blade Fuse Holder Circuit Replacement Parts by Kevin Duhon

Mirco2 version Works with 2017 Hyundai Elantra engine compartment fuse box. Care must be taken to ensure that there is sufficient free space in the desired direction. I used 2 taps and a fuse piece to change the outlet from Controlled Ignition to Always On. unused slot. On branch #2, due to the direction of the pigtail unlocked in the fuse box, I had to connect the pigtail to the power wire (the fuses were not removed as there was one on branch #1). I cut the fuse to take the wire from one side and bend it into a U shape to connect the two slots and then wrap it with duct tape. Connected Tap #1 with Tap #2 and viola! Always plugged into an outlet. The wires of the included fuses were too wide to fit in the tap. You would have to shorten them to fit. The fuses in the car are fine. Also, two fuses would be a tight fit. The ones that came with the kit had a fender on the body above/below the amp number. This made it difficult for the two to sit nicely. You will need to remove (cut or file) the plastic to insert the 2 fuses. The metal part of the fuses appears to be aluminum and is easy to file and bend.