Review on Keepsmile Music Sync LED Strip Lights, 50ft Color Changing LED Lights Strip with Phone App Control and Remote – Perfect for Bedroom, Living Room, Party, and Home Decoration by Summer Hendricks

All the best time of the day! Following the rest of the components of the LED backlight system (review of the power supply and review of the controller), I am writing about the light tape produced by "Navigator" brand NLS-RGB 5050RGB 60LED 12V 14.4W/m IP65 RGB. In one tape (sold wound on a reel) 5 meters long. I must say right away that it can be cut, and into very small segments (5 centimeters each). I cut it into 2 parts, attaching them to 2 sides of the room and powering them into the same connectors on the controller. Now both sides of the backlight is controlled synchronously. Difficulties arose during the installation of this product. More precisely, I had to deal with two problems. The first is the power connector at the tape. The store sells special terminals with a wire for connecting it, which I purchased. I tried to stick the contacts in, it didn’t work out, for the third time the flimsy connectors broke. Threw them out. Put simple VAGs. It didn’t work out to connect all this small things with high quality and reliability, well, yes, they seem to shine, and okay - the main thing is not to touch the connectors with your hands). Then I'll put them in a box. The second - the standard adhesive side of the tape turned out to be unsuitable for installation. I glued on even plastic wall panels and under the bottom of the plastic window sill. You tear off the film, press it, it doesn’t stick ... you tear off the film, heat it with a hair dryer, press it, it sticks, after 15 minutes the whole thing falls off. Having suffered, I smeared it with glue for ceiling panels (fortunately, there was little left) - a review about it here. The process got more fun. In the end, everything that needs to be stuck. Here is the white light: Result. Lighting with LED strips mounted in areas outside / above the field of view of the eyes creates the effect of daylight in the room - you look from the side, and there is day). The LEDs are bright, even running entirely along one of the walls (the length of the room) easily replace the "general" lighting chandelier. Moreover, the color of light can be selected in a wide range, creating a mood, or even turn on the flicker. When working in any color range, the brightness of the lighting is adjusted in small increments, which is very convenient. For example, a couple of glow colors: The system is interesting, I recommend it - it is suitable for both lighting and decorating the room and individual design elements. The degree of moisture protection of the tape, by the way, as well as its low supply voltage (12V) allows it to be used in damp rooms. So in this field there is where to play out fantasies. Wide prospect of use in advertising, exhibition stands, showcases and other business tricks. I hope it was useful for you. Thank you for your attention!