Review on 🛠️ Worx WA0235 Universal Wheelbarrow Aerocart by Mark Morrow

Should work with both narrow rim wheelbarrows and rounded metal wheelbarrows as described. However, plastic wheelbarrows with large lips have a wider edge to allow fingers to lift the wheelbarrow from the sides. The clip still goes through but doesn't open wide enough at the top to accommodate a rake etc. Did my work on a wide rim Jackson wheelbarrow by inserting a piece of 3/8 plywood about 14" long and 4" wide. Then I screwed two broom holder spring clips on each side of the plywood. Now you can repair 2 rakes. Check your car before ordering. Judging by the number of complaints about the installation of the inserts, they are true. There is a trick (not explained). It took me 10 minutes to figure it out, 15 minutes from the beginning to the end of the first clip. 3 minutes on the second. The trick is to remove the spring. IMPORTANT: Don't lose the 1" pin securing the longer side through the loop. The nut for the adapter to the shorter side is tiny. Insert the adapter into the hole and attach it to the end of the pencil with the eraser. Now thread the Phillips head screw through the adapter and the handle into the nut. Finally, put the spring back in place and thread the two handles through the spring from top to bottom. I don't know how it would be possible to do the assembly otherwise I'm trying to get into a tight space. That needs to be reworked. Mine isn't gone anyway.