2 Pack Universal Controller Holder Stand For PS5/PS4/Xbox One/Switch Pro - Anti-Slip Pads & Wall Mount Adhesive Or Screws | 6AmLifestyle Shark 12 Mini Review

Wanted to clear up desk space. Bought these. Installed on side of a cube stand. When I opened the box I saw all the items I needed. It came with extra adhesive stickies as well. Applied them to the back of the stands. Then applied the stands to the wall of the cube stand. Let 24 hours go by. Currently have a ps4 controller. Hyperx headset and Xbox elite 1.0 and 2.0 controllers. Very very happy with the outcome. Can't beat the price for this quality. Tape is strong. The stands have a rubber…

I bought these ones for the pure fact that I didn't have to drill them in anywhere and could just stick them to where I wanted/needed them.They won't stick anywhere. They're constantly coming down, knocking whatever it was holding onto the ground. Complete fail. When they do seem like they're stuck for good, the noise they make when they do come unstuck scares the piss out of everyone around.If you're going to drill them in, I say go for it. But if you're like me and trying to avoid that in…

If you are going for a very trendy or RGB gamer look, I highly recommend this as the stands are more simplistic, low-key, wall hangables for your controllers. Whether you use your controllers constantly or have them set up as decorations and collectables. I recommend getting these with headset mounts as well as these controller mounts go very well with various other headset mounts. Overall what I'm trying to say is that this product is a very great choice.

I love these holders! They were kinda hard to screw in even with my wall markings though. Honestly that's probably on me because I don't have much experience with a power drill lol. Besides that they are so awesome! They are super study when installed correctly and can even hold a Gamecube controller! "What more do I need", you ask? Well I can tell you. I discovered that they can hold my phone in landscape mode and portrait mode so when I'm gaming I can put the phone there and watch a video or…

So for the first week or two these were amazing. Till I came home and saw they had torn off the paint of the wall and two controllers had gone crashing into the ground from a substantial height. :/ one of my controllers now has a noticeable scuff permanently on the trackpad and the other a dent? They don’t seem to hold weight well. I’m really disappointed I wanted to buy more to display all my controllers.

Bought these earlier in the year when I moved into a new place. At first I stuck them to my wall and it was great, 3 days later they fell. I was shocked since I tried pulling it when I first put them on my wall and I thought they were stuck good, I stuck them on again and they fell again and again and again. I thought maybe the sticker was no good so I changed it to another one. It worked for a week and then they fell off again. I decided to stick them somewhere else so I stuck them on a desk…

So I like the fact that it makes my gaming set up look decent but I hate that the RGB piece is a little visible and is extremely touch sensitive. I charged it and by the next morning the battery was dead. I had to turn it off every single time someone would pass by or slightly touches itOther than that, it’s very sturdy. So if you don’t really care about the lights; the non RGB kit set would be a great buy!

The mount is what you'd expect. The lights on the other hand are a joke. There is no way to mount them to the mount. I used Velcro which works but i should have to modify anything. I've given up on the lights because they do not hold a charge. Charging them is a hassle because you have to take them off the mount each time. How they put the charge port is opposite the light so if you want to point the light down it's impossible to charge while still on the mount. By the time I want to show off…

I have to say that these mounted controller/headset holders are nice. They get the job done and they make your gameroom look neater just by being able to organize your controllers and headsets. I think the price is a little bit high for something that can be made using a 3d printer with about a dollar or two worth of plastic but wouldn't say I wouldn't spend the same amount again if I need more. If you are into wanting to clean up your room and have your headsets and controllers easy to find I…

Cleaned the wall as instructed, left for 48 hours to set, fell off in one hour. It’s made of strong plastic but the adhesive sticker is very weak or can not endure moister in side an office.

Good build quality and when paired w/ hook and loop (3m) fasteners they can be placed another with zero issue of damaging the host platform.

Needed to get the controllers and headsets off the desk and floor. These work great for the price. I would have liked to have gotten aluminum ones, but thought I'd try these for the price. Glad I did.

Arrived quickly and very easy to install. We ordered to keep the remotes/headsets away from the fog! So far, seems to withstand everyday use for children and adults alike.

Super easy to install! It came with 6 sticky pads and then screws for if you want to drill them to the wall. They are a great way to save desk space and they look really cool!

Easy to install. They sent extra stickies and screws used for mounting. I used the screws to mount and the sticky as a template. I used stands for xbox one controllers. Controllers fit well on stand. I like that my controllers now have some to live that looks good and is out of the way. I do recommend and will likely purchase another set.

So far they are holding up great with the supplied double sided tape. Great for the money. Would purchase more if the need arises.

I ordered this in hopes that I don't have to drill a hole in my wall. After 3 days of it being mounted on my wall, the glue on the stick pad faded and the holder fell. Overall the product is still good quality and does come with wall mounts but if you do not want to use the wall mounts then you may want to buy some adhesive tapes that are strong to hold on a wall.

The 2 Pack Controller Holder Stand Built in Anti-Slip Pads for PS5 PS4 Xbox One Switch Pro works great. The adhesive pads work great and seems to hold the stands fine.

Design flaws i think.One cord to run two led panels doesn't work.These also don't sync up together if you have two or more. Its also not as bright, however this can also be a good thing.Led light wise there's better out there.

For something so simple and easy to install, all 4 holders have kept up using their included double sided tape. Not only that, but the controllers have stayed in place nicely. Even with minimal space to put them on, they hold strong and sturdy. I definitely recommend these holders if you want to keep your controllers near and organized on the wall!