🔌 Tinned Tubular Terminal Connectors by AIRIC Review

Crimping requires a lot of force. Don't buy them if you don't have a hydraulic crimping machine. They hold the wire with great strength and look great when you end up with heat shrink tubing.

Excellent quality, perfect for MILAPEAK terminal blocks. 12 AWG silicone wire used. I would advise getting a ferrule crimper as regular pliers don't have enough force or special tips to crimp without that wire coming out. For their crimping, FRVIC uses VSR-16D.

The lugs or "lugs" on this gauge are kind of incredibly hard to find. These are indeed 12-10 AWG terminals. Crimps perfectly on THHN 10 AWG wire. This is what I use to ground my solar generator, battery, panels, etc. A much cleaner connection compared to wrapping a wire around a screw.

One of the highest quality grommets I have ever used and they are tin plated copper so you don't have to worry about rusting. The metal is NOT super thin, you will definitely need a hydraulic crimping tool or one of the crimping hammers to attach it properly. You can't use a pair of wire strippers to crimp either of these things. A++++

I've loosened the wires at the terminal in the past and they fit perfectly on the tiny terminal studs I've used on my latest builds. Carefully crimped with a budget tool and then used with heat shrink tubing for the first time to show off. It is possible that they put out 900 watts at times. Good price, quantity and quality for my latest build and more!

These are the highest quality cleats I have ever received. The photo shows the thickness. That's where I think it's 2.35mm. On another photo other 1.5mm thick studs of good quality. Their neck is very long, which provides sufficient crimping area and contact between the wire and the lug. Which is very important for high gain applications. In general, the bit delays I've received come from thousands over the years on the internet.

For example $2-5 each is expensive! I used to be disappointed with cheap plugs but this is the real deal. Thick tinned copper (corrosion resistance near batteries compared to bare copper) with no gap at front of crimp (allows corrosive gases into crimp - bad), with UL listing on packaging. Note that you will need a hydraulic crimping tool to secure these! Crimping tools like pliers, even good ones, will not be up to the task. As it should be! Very happy to find this company. This saves me a lot

Most importantly, you don't need a heavy crimping tool like a hydraulic block or double joint type like bolt cutters or even large pliers. These terminals aren't that thick, but rubbish, flimsy, cheap, nameless multifunctional crimping tools don't work, nobody should use them for anything, EVER. You only need a quality tool to crimp bare 10G connectors, such as: B. Klein 1019. 10G is a limitation for most tools, so 8G increases compressive strength requirements. HOWEVER, these terminals are not