AKK Switchable Integrated Configuring Betaflight Review

Using SA to control channels and power levels is a whole new level of convenience for all FPV pilots. The Betaflight OSD shows my FX3 reaching 800mW. I'm not sure where the dependencies are coming from, but it would be nice to know the actual output levels. The video feed is crystal clear with the dipole antenna and no hiss is visible when the throttle is moved. I'm using a 5V and 12V BEC from a DYS 4in1 ESC to power all the camera hardware, so that could also be the cause. I really like the…

I don't like writing reviews without testing thoroughly. I put it in a 3 inch Li based tooth fairy, Speedix GS 25amp 4n1. I tested on all MW and never got better signal after 2nd power setting which is 25MW or 100MW. When testing in the 600mW range, my meter only showed 191mW at its maximum range in each range. I was able to escape to an open space, perhaps to a soccer field, before the video squeaked. Tested with short and tall Axii and TBS Triumph. The goggles have the latest VAS Ion and True

The video was recorded at 600 milliwatts on my phone with an A/D receiver, so static is grossly exaggerated. I've never had Smart Audio or the built in OSD but I made the mistake of not routing the video through my f3 Magnum flight controller which had its own built in OSD which I originally thought was built into the original video Transmitter that came on the stack. which is fine because all I really wanted was a crosshair and a low battery warning to land anyway. Trying to get Smart Audio to