💻 ASRock H310CM-HDV Motherboard, Intel H310 Chipset, DDR4, SATA3 & USB3.1, A & GbE, MicroATX Socket LGA1151 Review

I installed it in a monoblock, instead of a board with an idiotic 2022 bios. Everything would be fine, but to connect the ssd m2 and the wireless module, you need to use pci-e controllers, not everyone will fit into the monoblock case in height. The board itself is excellent, reliable, for simple systems based on 2 - 6 cores.

Everything is great and no problem. Inserted components, turned on, works. Just adjust the cooler speed (Silent mode), by the way, the case fan can be both 3-pin and 4-pin, it is detected automatically. Got pros: Low price, 3 types of video outputs, one of the few mATX boards with a reduced size, which allows it to be installed in mini-ITX cases, and in fact this is the most valuable feature. 6 USB sockets (usually only 4 on mini-ITX boards). BIOS in 2022. Some cons: There are no drawbacks for…

DO NOT BUY ASROCK MOTHERBOARDS! They have NO customer service team and these motherboards are VERY unreliable. I was having issues where my motherboard wouldn't even boot directly into windows on startup and why now my boot system shows up after upgrading to i5 9600k. DO NOT BUY ASROCK MOTHERBOARDS!

can be bought for around $57 so definitely the best value "ITX" -Board. But since the pcie16 is one slot below the itx on this board, only single-wide cards can be used in the itx case, even if the itx case has two slots. on the back. Then you might as well use the integrated AMD processor graphics, since no decent graphics card is simply wide. Unfortunately, there is no AMD version of this short Micro-ATX board.

Tenía dudas sobre la placa ya que hay pocas referencias y no dicen tantas cosas buenas de ella. Hasta ahora sin problems like we have with the I3F and 1650S and with games and el día dia everything is fine. Si Hay Alguna Novedad Acá update.

This motherboard has bad design. They tried to give you a PCIe x1 slot AND a PCIe x16 slot. The problem is inside. The PCIe x16 slot sits at the very edge of the "bigger than usual" ITX motherboard. So. A double width graphics card will not fit in the case. It's not a graphics card or case issue (Well I think putting this ITX board in a bigger case will fix it. But then why buy an ITX board at this point?). The PCIe x16 slot MUST be placed in line with the bottom two motherboard mounting holes.