🔍 Enhanced Kitchen Scales: Beurer KS36 Precision Scale with Improved Accuracy Review

Got scales. I did the calibration as instructed. When using the measurements are very inaccurate, the error is tens of grams.! Even if you weigh the attached weight, then exactly 200 grams shows only at one point, move at least a centimeter to the side, the readings are different. Even if you try to accurately set, the accuracy is still very poor. Every measurement, different readings.

periodically wanders 0.1 g after weighing, but these are trifles, if desired, the accuracy can be calibrated before each weighing.

An error of 0.1gr is guaranteed only for loads up to 500gr. From 501 to 1000 already 0.2g. 1001-2022: 0.5g The weighing results are quite stable. 200gr. the weight from the kit with repeated weighing (a few days after calibration.) gives a result of 200.1-200.2 and sometimes 200.3, which, in principle, fits into the declared error of 0.1g Has pros: Sufficiently accurate, compact, with a calibration function. Batteries and calibration weight included. Cons below: The plastic case, the…

Good scale, I use it often. There are some disadvantages. Pros: The division value is 0.1 g (up to 500 g from the tare weight). Low zero drift when not heated or cooled (greater than 0.4g, never went away, have been using for 5 years). The kit included a 200 g calibration weight. Small size - convenient to take on trips. Powered by 4 AAA batteries. I use AAA batteries - works fine too (despite the lower voltage of batteries than batteries). Different cons: The power button is the size of a…

Before buying, I compared a number of kitchen scales, weighing coins whose weight is known to an accuracy of 0.001g. On display, these scales showed the highest accuracy. But after paying at the checkout, I began to check, and these have an error of 0.1-0.2 grams. Asked to change to those in the window. Changed. This scale is a good choice for those who need the accuracy of weighing a small amount of material.

An extremely rare combination of high precision 0.1 gr. and a sufficiently high weighing limit - 2 kg. Searched specifically. The scales have one interesting property - the ultimate load is really greatly underestimated. You can put a weight of 2 kg, tare (reset readings) and load another 2 kg. In this case, they will not give an error, but a completely acceptable result.

Pros below: Sufficiently accurate weighing of small volumes of products. Calibration weight 200 g included. Its cons: "Floating zero" indications when installing and removing the load.

As one of the users already wrote, an extremely rare combination of high accuracy and a fairly high weighing limit. When I bought it, I did not count on accuracy up to 0.1 g. I thought 0.5 if it was, it would be good. But in fact (checked with coins and combinations with a weight of 200 g), the values ​​\u200b\u200bdiffered from the correct max. by 0.2 g (in most cases, in general, there was a difference of 0.0-0.1 g). As for the downsides, I also agree with many. The construction is pretty…

In general, good semi-professional scales. For approximate weighing, you can not calibrate. Without calibration, the scales showed 200.7g, and after calibration 200.0g. With its pros: 1. Accuracy up to 0.1g (with weight up to 500g). 2. Maximum weight 2022g (accurate to 0.5g). 3. Calibration function with a weight. 4. Warranty 3 years. 5. Batteries included. Cons: 1. Already after the purchase, I read in the documentation that the service center is located in Hong Kong, and I bought the…

Its pros: Good scales that accurately show the result Compact, you can safely put it in the closet like a taler The price pays off Stylish design Got cons: Intermittently slow down, it takes time before eating to put the product to be weighed