🚚 Floe Triton Aluma Fast Plate Snowmobile ATV Trailer Channel Tie Down Kit - BOFiNEHY: 6061 Wrought Aluminum, 1 Pair Review

I like the product, but I only have plates. There were no fittings with plates. Please contact me so I can get the gear and use this product!

Could have been a great product but when I started to install the threads on one of the bolts were so uneven that they didn't thread and the other bolt wasn't threaded at all.

Good product, fits in the mooring channels on my Aluma snowmobile. One of the wedgelock nuts that goes in the channel wasn't the right thread for the bolt so I had to buy some.

Love this idea. The steel lock nut is too short and rotates freely in the channel. I was able to tighten it by inserting the head into the hole while tightening the screw.

Overall I am happy with this product. It seems strong enough to hold my snowmobile. As others have noted, the panel that slides into the reverse rail could be a bit longer to wedge the walls. However, it's easy enough to use a screwdriver to hold the plate in place to tighten it.

They will work but you need to be aware that the metal spacer that goes into the rail is too short to attach by simply tightening the screw at the top to become. . It should be 3/8 inch longer to work perfectly. You'll need to poke a screwdriver or something to keep the spacer from moving until it touches the rail. Then dressing works. Also, 2 out of 4 of my bolts were too tight in the gasket. So I had to clean/expand it a bit with a die to get the included screws to fit just right. If you…