CARBURETOR COOLSTER 100CC 110CC COMPLETE Review

If you have a Coolster 110 this is a must! . I've owned a 4 wheeler for 3 years and it was never quite right, always had to give it a bit of throttle and it was difficult to start. I wanted to clean the old carburetor but you can't remove the bowl so I decided to try a new carburetor. I got it within 2 days and as soon as I installed it pushed the button and it barely rolled over and idled better than the day it was new. no adjustments are required. very very satisfied!

Carburetor came quickly and fits our Coolster. The bike does not work very well with this new carburetor. It starts hard and should run with the choke slightly open. I suspected an intake leak so I removed the new carburetor and checked the gasket was there. Everything is as expected, but the bike still doesn't handle very well. I wrote to the seller but received no reply. While you are waiting for help from the seller, the return period has expired. I have a bad carburetor stuck.

I bought this for a Coolster 3050C (110cc) ATV. My son's ATV started dripping fuel from the float overflow after about 2 years and eventually drained the gas tank. I was amazed that the stock carburetors are riveted so you can't just remove the bowl to access everything. For the money, this replacement was plug and play. Took me about 25 minutes to get it installed and hooked everything up. He fired right out of the gate, great at idle and driving. There are no more leaks. For this money I…

110 picked up from Craigslist for daughter. The typical one hasn't run in years, and now we don't know what's wrong with it. Replaced the battery, switch and fuse holder then drained the tank and tried to clean the carburetor but found it was faulty. Sprayed it with carb cleaner as best I could, it ran for about a minute and then wouldn't even idle no matter the choke or throttle setting. Put on this bad boy without changing any settings and she yanks so hard I have to take back before she gets

I replaced my old carburetor on my 70cc Coolster pit bike with this unit and it worked. The screw that releases the gas from the bowl prevented the gas from escaping the drain hole. Looks like this port hasn't been reamed. However, it allowed gas to escape from the screw hole. There are two adjustment screws on this unit, but my original carburetor only had one. Also, my original had the side port clogged and it is open and the connector doesn't fit in. I'm not sure what it is for? vacuum…

This is a great little carburetor. I bought this to replace the stock carburetor on my son's Coolster 125 ATV. Standard carburetors don't have an easily adjustable mixture screw or needle, but this one does. That way you can really adjust it to whatever height you ride at. These machines are designed to operate at sea level and we live at 5,000 feet so they always run too rich and without enough power. I bought this carb, put the needle in, two turns on the mixture screw and started it. Let it…