🚛 Vouke 38 LED 12V Universal Tail Brake Turn Stop Licence Back up Lights for Truck Trailer Boat, 12V Stud Mounted Lamps - Pack of 2 Review

Good product. It shines great and works as expected. Installation problems on Jeep 2000 TJ. The mounting screws are thicker than the holes the original lights come out of, so you will need to drill a bit to widen the holes. Obviously this isn't plug and play, so expect some splicing and wiring. But nothing serious. You can also remove the adapter and directly make some cuts if you want to go the hard way. Make sure you have an LED relay for your jeep or your headlights will flash very quickly…

bought in June 2019, one bulb failed and Vouke sent me a new pair replacing the bad ones and about a month later the second original failed, I have not contacted Vouke they have Already sent me A new pair, second replacement installed, worked about 3 days ago 20th September 2020. Contacted Vouke and they said it has been a year since my "purchase" they cannot provide a warranty replacement, but they will offer me a 50% refund if I buy a new pair. A generous offer, to be fair. However, I need…

Love these taillights. But let's start with the good ones (yes, there are bad ones too). Good. Those taillights are bright (very bright), the reversing lights are good and you can (for once) see where you're going in the dark. New turn signals are cheap. , are easily accessible for LED rear lights and easy to replace. The bad: Unless you know your vehicle's electrical system and how to diagnose the problem, have your new taillights replaced by a professional. If you are replacing Original…

The headlights are very bright and the mounting holes match those of the Jeep TJ. Lanterns are supplied with three rivets installed. I sprayed them with a blaster (WD40) and tapped them. Now they can be mounted like factory Jeep taillights. I cut the connector off the stock TJ tail light wiring harness leaving about three inches of wire. Connect the yellow wire from the new tail light to the pink/black wire on the Jeep connector. Connect the black wire to the black/yellow wire and the red wire…

Bought these replacement taillights for a 1999 Jeep Wrangler TJ (instead of the more expensive branded ones). Very satisfied.! There are no installation instructions, but it's pretty easy to figure out. The LEDs are very bright, especially the brake/turn signals. The only negative I can think of so far in my case. Because they weren't made specifically for the Jeep Wrangler, the license plate light that shines straight down from the taillight is actually on BOTH lights, not just one (which…

NOTE: This is brand independent, but every less expensive pair of taillights, including this one, are basically two identical lights. Unlike more expensive bulbs that are specifically designed and sold as "driver" and "passenger" marker lights, these less expensive bulbs are identical. What does that mean? The lower license plate light dome lights up on BOTH headlights. In addition, some other "qualifying" products have additional marker lights on the SIDE of the lights; On the driver's side…