🔥 CP3 12V COB Flexible LED Strip Kits - 2700K Warm White 16.4 FT - 400LEDs/Meter - No Hot Spots - Bendable Continuous Lights Tape - CRI 80+ - RF Remote & UL Power Supply - DIY Home Decoration Review

The ideal solution for a sign with side lighting! I installed it on the inside of an aluminum C-profile that I used to frame my 1" plexiglass. I would appreciate if it was weatherproof, but the clear silicone roller seems to help too.

3 of the 4 devices ordered have a power supply that causes the light strip to flicker. The controller has a mind of its own and sometimes turns on/off randomly. The light strip itself is decent. Plan to buy a separate power supply/controller if you buy one.

Absolutely love this light! I have other LED strips but this one is amazing with a washed out look and no beads. My only complaint is that it's layered on top of the light to make it blurry rather than seamless, and some parts actually overlap making it look like a bunch of strips bunched together.

I like that the strip gives a nice constant glow. You don't see any LED dots just a beam of light which is very cool. BUT forget the remote control: it failed a few minutes after turning it on. Support did not provide any help or replacement.

The light flickers every 24 hours and I have to press the button on the remote control at one of the brightness levels (25-50-100) to solve this problem. It doesn't matter what level you are on, it flashes every 24 hours. The product has an obvious manufacturing defect as the flickering issue has been mentioned in many other reviews. I would urge the seller to look into the issue and stop selling until new batches are produced.

The headlights look great so far. Beautiful color, uniformity and bright enough. But that's where the good qualities end. I can't dim or control the light bar with the included remote and module. Connects easily but does nothing. By default, when the remote module is connected in series, it will turn on the LED strip as soon as the power supply is connected. The console does nothing. The red light on the remote will illuminate when the buttons are pressed, making it clear that the remote itself

Very happy with the result! I installed them under the kitchen cabinets and above the sink, soldering 18AWG and clear heat shrink between the connections and using separate wire channels to hide the wires going to the bar above the sink. The controller works well with the remote, dim settings below 100% cause noticeable flickering, however I plan to buy another controller later that works with Alexa. Also note that the LED strip is made up of several smaller strips (about every 2 feet) and has…

This light strip is advertised as being flicker-free and visually appealing. However, this only applies if you are not using the remote control module or if you are using the remote control but leave it at 100%. When the light output is set to 50% or 25% (the other two options), it flickers at a low frequency. You can hear the light by plugging a small solar panel https://www.amazon.com/gp/product/B008J9BZIA into the 3.5mm jack of some headphones or PC speakers. When you do this, you may hear…