🔌 Dorman 800-671 A/C Line Splice Kit 3/8 Line No. 6 Hose - Enhanced SEO Review

Repaired my 2011 GMC Acadia A/C system for hundreds less than replacing the entire cluster. My friend installed it and saved me a lot of money. After a few weeks it's tight and the conditioner is ice cold.

I was able to cut the bad section of aluminum AC wire and use the connection to fix it. It was easy when you have the space and I drove 1500 miles to Florida with no problems.

I used this and a 5/8" Splice Kit to repair some AC lines that went into the 3rd row on my Hyundai Santa. feet Installation requires at least 2 inch straight pipe. On one of the lines I had to make 4 cuts in a row with a tube cutter to get a line just enough to install the fitting. Last year for a bathroom renovation. The instructions also call for the use of cooling oil to lubricate the parts. I only used a small amount of synthetic bike lube. The instructions also specify a very low torque…

Great product. Easy to install once you get the right length. Just make sure your lines are very clean or you'll get a leak. Supplied with approx. 30" 3/8" AC hose and original Oetiker crimps. It's a lot easier if you have an Oetiker crimping tool, but mesh fabrics have the wisdom when you need to make up a shortage. The length of the hose is useful for areas where more than one leak may occur. It's like driving a car. Therefore, before cutting the hose to length, check all adjoining areas for…